Japan, Kanetec
Kanetec No.5 Series Simple Magnetic Holder
Product Made in Japan
Manufacturer: Kanetec
Model: No.5 Series
Features
Simple holders consisting of an isotropic ferrite permanent magnet covered by an iron yoke. Dimensionally, the finishing accuracy is not good and these holders are not recommended for incorporation in jigs/fixtures. When these holders are used for the purpose of holding only by themselves, such purpose can be achieved at low cost.
Specifications
Round
| Model | Yoke Dimensions | Magnet Size | Magnet Type | Mass | Remarks | |||
|---|---|---|---|---|---|---|---|---|
| D₁ | H₁ | t | ||||||
| KM-FC2 | Ø18 (0.70) | 5 (0.19) | 0.8 (0.03) | Ø15 (0.59) × 4 (0.15) | 12.5g / 0.027lb | |||
| KM-FC4 | Ø24 (0.94) | 5 (0.20) | 0.55 (0.02) | Ø20 (0.78) × 4 (0.15) | Isotropic | 23.8g / 0.052lb | ||
| KM-FC5 | Ø31.6 (1.24) | 4.7 (0.18) | 0.8 (0.03) | Ø28 (1.10) × Ø5.5 (0.21) × 3.5 (0.13) | Isotropic | 38.2g / 0.084lb | ø4.3 hole provided | |
| KM-FC6 | Ø36 (1.41) | 7 (0.27) | 1.6 (0.06) | Ø30 (1.18) × 5 (0.19) | Isotropic | 97.5g / 0.214lb | ||
| KM-FC7 | Ø44 (1.73) | 10 (0.39) | 2 (0.08) | Ø38 (1.49) × Ø9 (0.35) × 5.7 (0.22) | Anisotropic | 122.5g / 0.270lb | M4 tapped hole provided | |
Rectangular
| Model | Yoke Dimensions | Magnet Size | Magnet Type | Mass | Remarks | |||
|---|---|---|---|---|---|---|---|---|
| L₁ | W₁ | H₁ | t | |||||
| KM-FK3 | 20 (0.78) | 34 (1.33) | 7 (0.27) | 1.6 (0.06) | 20 (0.78) × 30 (1.18) × 5 (0.19) | Isotropic | 51.4g / 0.113lb | |
| KM-FK5 | 55 (2.16) | 30 (1.18) | 8 (0.31) | 1.5 (0.05) | 49 (1.92) × 24 (0.94) × 6 (0.23) | Isotropic | 140g / 0.308lb | |
Dimensions
Related Products
-
Chiyoda Seiki Cylinder Collection Device For Liquid Qxygen/nitrogen/argon And Liquid Carbon Dioxide
-
Kanetec MP Serises Magpad TM
-
YOSHITAKE AL-150TML Safety and Relief Valve
-
SAKUSAKU DIMC2 6L Insert For Grooving / Parting Off With C-type Chip Breaker
-
Kunimoto 1301210 KS U-shaped Clamp Fixed Type 2
-
Tsugaru Kogyo No.1065 Versatile Clamp (Swivel)
