Okabe
Okabe A30-0410 H-Beam Scaffolding Hanging Frame (Welding)
Product Made in Japan
Manufacturer: Okabe
Model: A30-0410
Scaffolding hanging frame for H-beam
Features
- Construction period is shortened.
- Setting up of scaffolding is completed at the same time as temporary tightening of the steel frame is completed, except for around posts.
- Safety aisle for high-place work.
Allowableload
- In case of uniformly distributed load
- One side 1.96kN (200kgf) or less
Horizontal movement amount of handrail pole
Horizontal movement amount when horizontal load is 0.78kN |
---|
100mm or less |
* Type B and type AW-55 are also available.
Product | Weight (kg/pc) |
---|---|
Cantilever type B | 11.7 |
Type H-56 | 15.6 |
Type B | 15.8 |
Type AW-55 | 15.6 |
Cautions
- Prior to use, adjust the height and set the bolts completely.
- Use high strength bolts F10.9T, M12×50 as attaching bolts for H-beam Scaffolding hanging frame.
- Make sure that the two attaching bolts to connect the arms and the horizontal pipe are securely tightened.
- Taking advantage of features of H-beam Scaffolding hanging frame, perform as much assembly as possible on the ground (installation of handrail, scaffolding board, etc.).
- Be sure to install a crosspiece in the middle section of a handrail.
- When there is strong wind or during a typhoon, stop working. When the weather has improved, perform a safety inspection such as checking bolts for loosening.
- Be sure to use the product within the allowable load.