Japan, Magnescale
Magnescale BD700 Laserscale
Made in Japan
Manufacturer: Magnescale Co., Ltd.
Model: BD700
Features
- Capable of outputting synchronized position information in two axes.
- Maximum number of divisions : 65,536, Maximum resolution : 2.1 pm
- Interpolation accuracy of ±10 pm achieved by real-time signal correction processing
- Supports a wide range of interfaces
- Supports a maximum response frequency of 7.5 MHz for analog inputs (12.5MHz possible as special model)
- Short interval accuracy can be corrected to improve cumulative accuracy
- USB output of incremental data; setup and operating automated calibration.
Specifications
| Specifications | |
|---|---|
| *1 : This is our original serial communication protocol. *2 : Varies depending on installation conditions. | |
| Communication method | Serial : To be certified by each company1 (Yaskawa Electric, FANUC, Mitsubishi Electric, BiSS C (MGS), MGS *1 ) 1 Simultaneous output of phase A/B and analog 1Vp-p in addition to serial communication In addition to the above, it can be connected to a PC via USB. |
| Maximum number of divisions | 65,536 divisions |
| Maximum response frequency | 7.5 MHz (12.5MHz possible as special model) |
| Reference point detection direction | Single direction |
| Alarm | Level down, level over, speed over |
| Accuracy compensation | Ability to correct accuracy in short intervals to improve cumulative accuracy |
| Auto Calibration | Automatically adjusts output when scale is installed |
| LD drive current monitoring | Measure drive current for Laser Diode |
| Power supply | DC +4.75 V to DC +9.75 V |
| Current consumption | Max. 2 A |
| Operating temperatu | +10 to +35 °C *2 (No condensation) |
| Storage temperature | -10 to +50 °C (Humidity below 60 %) |
| Mass | Approx. 650 g |
