Japan, Kaneko Sangyo
Kaneko Sangyo M15G Series Four-Way Solenoid Valve (Single)
Manufactuer: Kaneko Sangyo
Model: M15G Series
Summary
Typically, a four-way solenoid valve is used to operate the double-acting cylinder.
Mainly, there are five pipe connecting port, four-way solenoid valve, has become a place 2 1 inlet, 2 outlet, outlet. Because it is always closed, the exhaust port is one of the four direction any functionality.
Single solenoid and has one coil inside, switched switched to its original state, flow direction when the solenoid is energized from a power outage and blackout state.
Feature
Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abrasion resistance in operation can not operate even without lubrication.
The main parts are made of aluminum alloy, has become very small and light.
You can be easily replaced AC, DC coil is designed so that both fit into the same casing.
Corrosion treatment has been applied in a very strong hard anodized corrosion resistant.
Flameproof is a test of the Ministry of acceptable product.
Main valve is not malfunction due to spring for actuation by a piston, without the need for a spring, also be left for a long period of time and therefore will operate 換作 off balance spool type.
With buttons for manual, you can check or test operation.
Minimum operating pressure is 0.1MPa operate reliably in because there is no Earosu.
You can also be used as a three-way valve to select the port in the form of port 5.
Standard specification
- FLUID : CLEAN AIR
FLUID TEMPERATURE : －20～60℃
AMBIENT TEMPERATURE: －20～60℃
DUTY CYCLE: 100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE: ＋10，－15％
WORKING PRESSURE : 0.1 ～ 0.99MPa - Cv. FLOW FACTOR: 0.87
ELECTRICAL SPECIFICATIONS: See below
STANDARD VOLTAGE
| AC | DC | |||
|---|---|---|---|---|
| V/Hz | INRUSH A | HOLDING A | V | A |
| GENERAL PURPOSE TYPE 12PG, EXPLOSION-PROOF TYPE E12PU | COIL INSULATION CLASS:H | |||
| 100/50 | 0.27 | 0.16 | 24 | 0.33 |
| 100/60 | 0.25 | 0.13 | 48 | 0.15 |
| 110/60 | 0.25 | 0.15 | 100 | 0.072 |
| 200/50 | 0.14 | 0.08 | 110 | 0.08 |
| 200/60 | 0.13 | 0.07 | 125 | 0.06 |
| 220/60 | 0.13 | 0.08 | ||
Product Image
M15G GENERAL PURPOSE TYPE
| M15G-8～10 GENERAL PURPOSE TYPE | ||
|---|---|---|
| NOMINAL DIAMETER | MOUNTING LENGTH | H |
| 8 | 60 | 123 |
| 10 | 60 | 123 |
M15G EXPLOSION-PROOF TYPE
| M15G-8～10 EXPLOSION-PROOF TYPE | ||
|---|---|---|
| NOMINAL DIAMETER | MOUNTING LENGTH | H |
| 8 | 60 | 138 |
| 10 | 60 | 138 |
M15G HYDROGEN EXPLOSION-PROOF TYPE
| M15G-8～10 HYDROGEN EXPLOSION-PROOF TYPE | ||
|---|---|---|
| NOMINAL DIAMETER | MOUNTING LENGTH | H |
| 8 | 60 | 156 |
| 10 | 60 | 156 |
M15G DUST EXPLOSION-PROOF TYPE
| M15G-8～10 DUST EXPLOSION-PROOF TYPE | ||
|---|---|---|
| NOMINAL DIAMETER | MOUNTING LENGTH | H |
| 8 | 60 | 190 |
| 10 | 60 | 190 |
DESCRIPTION OF OPERATION
Related Products
-
Ross Asia MD4 series Port size is 3/8″ to 3/4″. Flow rates up to 205 scfm (5806 l/min)
-
Atom Kousan Urethane Elastomer for Conductive Urethane Material
-
Chiyoda Seiki BO-4 Piping Take-out B Valve For Oxygen
-
Kansai Kogu 41B00,41C00,41K00 SDS-max Shank
-
ENDO KOGYO MTH Series Air Motor Trolley
-
Nippon Chemical Screw PEEK GF30/PH(Thread size-L) PEEK/GF30(+) inch pan head machine screw
REQUEST QUOTATION
PAYMENT
LINK
