Fukudaco, Japan
Fukudaco High-Performance Air Gear Motor Spindle and Floating Holder
Manufacturer: Fukudaco
Overview
Spindle & Holder for Deburring Robots Using the Latest Technology
Application
Automation of deburring by robots
Features
Spindle
- Strong load resistance with persistent torque using an air gear motor
- Can be used without lubrication (suitable for resin processing, etc.)
Holder
- Lightweight due to resin construction
- Compatible with spindles from other manufacturers
Air Gear Motor Spindle
High output and high torque without oil
RS30ZM Series: Spindle body diameter ϕ30 mm
The Air Gear Motor Spindle developed by WSE (Germany) is the world’s first to use a gear motor in industrial spindles. It achieves unparalleled high torque and high output with minimal air loss. Furthermore, it is completely oil-free with no lubrication required, thanks to the use of special resin gears.
Features
- High torque, high output
- Oil-free, high-durability
- Air-powered yet continuous operation
- Capable of forward and reverse rotation
Newly Developed WSE Air Gear Motor
The driving air enters through the inlet and flows to the opposite side outlet along the inner surfaces above and below the gear gaps. This process ensures that the gear rotates, generating persistent torque that cannot be easily stopped even with a slight pressure of 0.3 MPa air pressure. Additionally, the special resin gears provide quiet operation and oil-free performance, making it a completely new type of air motor, unlike any traditional model.
WSE Air Gear Motor Spindle
Specification
| Model | Rotational Speed | Maximum output | Maximum torque | Maximum cutting diameter | Noise | Weight |
|---|---|---|---|---|---|---|
| RS30ZM30 | 30,000min -1 | 250W | 0.27N/m | 8mm | 73dB(A) | 490g |
| RS30ZM40 | 40,000min -1 | 200W | 0.21N/m | 6mm |
Oil-free vane motor spindle
WSE (Germany) vane motor spindles are pneumatic spindles that use vanes made of special materials developed in-house and can be operated without lubrication (except for RS45LM20).
RS .. LM series: Spindle body diameter ϕ30, ϕ32, ϕ38, ϕ45 mm
*RS45LM20 is not oil-free.
Specification
| Model | Rotational Speed | Maximum output | Maximum torque | noise | weight |
|---|---|---|---|---|---|
| RS30LM40 | 38,000min -1 | 220W | 0.18N/m | 80dB(A) | 620g |
| RS32LM20 | 20,000min -1 | 370W | 0.40N/m | 81dB(A) | 650g |
| RS38LM18 | 18,000min -1 | 600W | 1.40N/m | 82dB(A) | 940g |
| RS45LM20 * | 20,000min -1 | 900W | 1.40N/m | 82dB(A) | 1,300g |
The rotation speed, maximum output, maximum torque, and noise are values at 0.6 MPa.
*RS45LM20 is not oil-free.
Parallel Motion Floating Holder VMS2000
This is a parallel floating holder with a special link structure newly developed by WSE (Germany).
The body is made of reinforced polyamide and is ultra-lightweight, so it will not break even if dropped.
In addition, it uses a body diameter clamping method, so it is possible to use spindles made by other companies.
Features
- 360° parallel motion with a maximum travel range of 7 mm
- The stress can be adjusted in the range of 25 to 85 N by adjusting the air pressure.
- Ultra-lightweight design weighing just 700g
- The body diameter clamping method adopted
Manufacturing process
Operation of the completed VMS2000
The parallel link structure allows for 360° parallel translation without changing the spindle angle.
The bellows section has a spring structure, and the stress can be adjusted as desired by adjusting the internal air pressure.
Dimensions
Optical Speed Sensor System SLC100
Related Products
REQUEST QUOTATION
PAYMENT
LINK
