Ogura MB-225 Portable Rebar Bending Machine

Product Made in Japan
Manufacturer: Ogura
Model: MB-225

Features of MB-225

High-end reinforcing bar bender for D25 (SD490 material).
Easy dial dialing is used to set the basic bending angle. In addition, the angle can be adjusted more finely when used in combination with the fine adjustment lever.
Adopts a “partition wall structure” that does not allow iron powder that can cause failure to enter.
A roller collar of each size is standard equipment.
Using a foot switch further improves workability and operability (sold separately).
The “Small Angle Bending Collar” supports D10, D13, and D16 “Small” bending radius processing (sold separately).
The optional roller collar also supports 6D bending (sold separately).

Motor	Single phase 100V 1430W 50 / 60Hz
Mass	94.9kg
Body dimensions	540 (L) x 466 (W) x 441 (Maximum/minimum
minimum bending radius	For SD345: D10 (R62.5 to R20), D25 (R62.5 to R26)
Bending speed	D25 (SD390): 180 ° bending (about 9.0 seconds)
Number bent at a time	D25 (1), D22 (1), D19 (2), D16 (2), D13 (3), D10 (4)
Bending ability	Reinforcing bar diameter D25 (* SD490 equivalent: 620 N / mm kg63 kgf / mm ² ))
Bending angle range	4 steps up to 180 ° (with fine adjustment function)
Standard accessories	Roller (No.B25 · 425 · 422 · 416), Collar (No.425 · 422 · 419 · 416 · 413 · 525 · 522 · 519), Hexagon wrench (2 · 8 · 17), Spanner (17 x 19 ), (+-) Screwdriver, grounding adapter, toolbox, waterproof cover
Option	Footswitch, body stand, right angle bend collar (D10 · D13)

Minimum necessary length of bending

Combination of Roller and Collar

Rebar diameter	Roller	Collar	A dimension (minimum)
Rebar diameter	Roller	Collar	90 ° bend	135 ° bending	180 ° bending
D10	^* 413 (Φ193)	None (Axis Φ40)	111mm	130mm	150mm
D10	^* 410 (Φ211)	None (Axis Φ40)	81mm	100mm	120mm
D13	416 (Φ175)	413 (Φ52)	123mm	149mm	174mm
D13	^* 413 (Φ193)	413 (Φ52)	93mm	119mm	144mm
D16	416 (Φ175)	416 (Φ64)	106mm	137mm	169mm
D19	422 (Φ136)	419 (Φ76)	152mm	190mm	227mm
D19	^* 419 (Φ155)	419 (Φ76)	123mm	161mm	198mm
D22	422 (Φ136)	422 (Φ88)	138mm	181mm	224mm
D25	425 (Φ115)	425 (Φ100)	156mm	205mm	254mm

(Note) *: Optional.
(Note) When bending D10the, use No.413 or No.410 roller.

■ Combination of Roller and Collar for 5D (optional)

Rebar diameter	Roller	Collar	A dimension (minimum)
Rebar diameter	Roller	Collar	90 ° bend	135 ° bending	180 ° bending
D16	^* 419 (Φ155)	^* 516 (Φ80)	120mm	151mm	183mm
D19	422 (Φ136)	519 (Φ95)	140mm	178mm	215mm
D22	425 (Φ115)	522 (Φ110)	158mm	201mm	244mm
D25	B25 (Φ92)	525 (Φ125)	179mm	228mm	277mm

(Note) *: optional.

■ Combination of Roller and Collar for 6D (optional)

Rebar diameter	Roller	Collar	A dimension (minimum)
Rebar diameter	Roller	Collar	90 ° bend	135 ° bending	180 ° bending
D19	^* 619 (Φ119)	^* B619 (Φ114)	148mm	200mm	252mm
D22	B25 (Φ92)	^* B622 (Φ132)	172mm	232mm	292mm
D25	^* 625 (Φ65)	^* B625 (Φ150)	194mm	263mm	332mm