Manufacturer: Thomas Scientific Instruments Co., Ltd.
Model: T-104NA

• Constant temperature water bath that can be heated up to 99.9℃
• High temperature stability with PID control
• Equipped with various safety features such as overheat and low water level alarms.
• Selectable timer function with auto-stop and auto-start
  (maximum 99 hours 59 minutes)

Usage example

It can be used for various water and heat resistance tests (for resins, paints, etc.), wood adhesion strength tests including boiling peel tests and repeated boiling tests.

Specification

External dimensions	W525×D360×H500mm
Internal dimensions of the tank	W350×D305×H300mm
Effective dimensions inside the tank	W350×D230×H260mm
Capacity (L)	28
Temperature range (°C)	Room temperature +5℃ 99.9℃ *At temperatures above 80°C, the temperature may not rise unless the lid is closed, depending on the conditions.
temperature stability	±0.02℃ (at 40℃)
temperature control	Digital temperature indicator and controller, PID control system, platinum resistance temperature sensor (Pt100Ω)
timer	1 minute to 99 hours 59 minutes: Auto start timer or auto stop timer
heater	Sheath type 1.4kW
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, overheat prevention in tank, self-diagnostic function (heater wire breakage, low water level, temperature sensor malfunction, triac short circuit)
Material	Inner tank: Stainless steel (SUS-304)　 Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel height-adjustable shelf with lid (1 each)
power supply	AC100V 15A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ12mm
weight	Approximately 25kg

Illustrations