Manufacturer: Thomas Scientific Instruments Co., Ltd.
Model: T-201P

This is a high-performance, compact, externally circulating constant-temperature oil bath with a 16L capacity.
It reaches a maximum temperature of +200°C in approximately 100 minutes.
A powerful agitator motor allows it to handle even highly viscous oils (MAX 100 mm²/s).

• High temperature stability (±0.1℃) due to PID control for temperature control.
• Safety features include an over-temperature prevention alarm and a low liquid level alarm.
• External circulation function:
  In addition to testing within the tank, it is possible to circulate high-temperature liquids up to +200°C externally to heat and maintain a constant temperature for external equipment.
  *A basic constant-temperature oil bath without circulation function, “T-201,” is also available.

External dimensions	W500×D385×H410mm
Internal dimensions of the tank	W300×D310×H200mm
Effective dimensions inside the tank	W300×D220×H200mm
Capacity (L)	16
Temperature range (°C)	Room temperature +10℃ 200℃
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheathed type 1.2kW
Agitator	By a circulation pump that also serves as an agitator
Circulation pump	60W motor for both agitation and pumping Maximum head: 2m Maximum flow rate: 2.8L/min Maximum discharge pressure: 0.02Mpa (100mm²/s, based on room temperature oil)
Circulation IN-OUT	Outer diameter φ12 hose connection (Rp 3/8)
safety equipment	Leakage circuit breaker, overheat prevention in tank, low liquid level alarm.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel shelf board (1 set)
power supply	AC100V 13A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ12mm
weight	Approximately 16 kg

Illustrations