Japan
CPC/CPA Center Punch
Product Made In Japan
Model: CPC Series/ CPA Series
Center punch with carbide tip
| Model | D x L |
| 100mm/CPC-M | 10 x 100 |
| 110mm/CPC-L | 15 x 110 |
| 125mm/CPC-LL | 17 x 125 |
A center punch with a carbide tip embedded in the tip.
• Material S45C
Automatic center punch
| Model | D x L |
| 125mm/CPA-M | 18 x 135 |
| 140mm/CPA-L | 24 x 154 |
An automatic center punch with a carbide tip embedded in the tip. The spring works just by pressing it strongly, and you can mark without hitting.
Related Products
-
SAKUSAKU TNGG160408-L Turning Insert 60° Triangular/Negative
-
NAGANO KEIKI M___ Engine M2 Type Indicator(MM20)
-
Chiyoda Seiki SGX-25N Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 1.0 to 35.0 kPa/set pressure 0.5 to 20.0 kPa)
-
Eagle Clamp SBF Type Vibration Prevention Jig
-
KONAN TA2 Series Rotary Actuator With 5-Port Solenoid Valve Double-Acting Type [Type D]
-
TERAOKA SEISAKUSHO 632S #25 Polyester Film Adhesive Tape
