Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 7090 Double-coated Thermal Conductive Adhesive Tape
Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 7090
No. 7090 is a double-sided tape made by applying a thermal conductive adhesive to a thermal conductive Kapton(R) film.
Use for thermal control in electronic devices.
Structure of 7090
Features
- Excellent for heat radiation to use high heat conductivity adhesive
- Without Siloxane gas for acrylic-based adhesive
- The base film has electrical insulation performance
- It is possible to die cut in a complicated form because it is with a support film
Uses
- Fixing heat sinks of electronic components, semiconductors, CPU, etc
- Fixing parts with thermal conductor
- For heat radiation of LED
Overall thickness (㎜)
|
0.125
|
---|---|
Standard length (m)
|
20
|
Peel adhesion (N (gf) /W25㎜)
|
17.65(1800)
|
Breakdown voltage (kV)
|
6.8
|
Shear adhesive strength (N/400㎟)
|
490.3
|
Standards met
|
─
|
Other
|
Thermal conductivity 0.7W/m・K
ΔT(Temperature difference) 11.3℃ |
RoHs2 directive 10substances are not contained.
Related Products
-
Chiyoda Seiki EX-M-600 Excellent Mega Series Electropolishing (Primary pressure: 3.0 MPa or less/adjustment pressure 0.1 to 1.0 MPa, maximum flow rate: 50 ℓ, 150 ℓ/min・Air)
-
Fuso Seiki Magic Cut E-Mist
-
Kyowa LMA-A-50N LMA-A Small-sized Compression Load Cell
-
Kyowa LCW-C-300KN100SA3 LCW-C-SA3 Washer-type Load Cell
-
Chiyoda Seiki Lightweight Hand Hose
-
Kyowa Unmanned Maritime Observation Acquisition Offshore Structure Measuring Device