Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LCX-A-10KN-ID Small-sized Compression Load Cell
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LCX-A-10KN-ID
The LCX-A-ID is a stainless-steel load cell, for measuring compressive loads. It is compact & lightweight.
Features
• Easily replace cables
• Exchange to a bending resistance cable possible
• TEDS installed
Specifications
Performance
Rated Capacity | 10 kN |
---|---|
Nonlinearity | Within ±0.1% RO |
Hysteresis | Within ±0.1% RO |
Repeatability | 0.05% RO or less |
Rated Output | Within 1.5 mV/V or more |
Environmental Characteristics
Safe Temperature | -20 to 80°C (Non-condensing) |
---|---|
Compensated Temperature | -10 to 70°C (Non-condensing) |
Temperature Effect on Zero | Within ±0.005% RO/ºC |
Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
Safe Excitation | 15 V AC or DC |
---|---|
Recommended Excitation | 1 to 10 V AC or DC |
Input Resistance | 375 Ω ±1.5% |
Output Resistance | 350 Ω ±1% |
Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 150% |
---|---|
Safe Lateral Loads | 15% the rated capacity |
Natural Frequencies | Approx. 28 kHz |
Materials | Stainless steel |
Weight | Approx. 120 g (Excluding cable) |
Degree of Protection | IP67 (IEC 60529) |
Optional Accessories | Saddle CA Mount base CX |
---|
Dimensions
Mount Base
CA-2F
Related Products
-
U_RD CTL-7-CLS AC Current Sensor
-
NAGANO KEIKI PL10 Room Inspector Monitoring Low Pressure
-
Vessel No.GT-NY10G Sliding Air Nipper Horizontal-Type
-
Chiyoda Tsusho 3FAG2F-6.5H/3FA3F-6.5H/3FAG2F-8H/3FA3F-8H FREE ANGLE ST TYPE
-
Ascon Double VMC-X2 Problaster
-
Kanetec PCMH2-D-B MAGNETIC FILTER FOR VISCOUS LIQUID