Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa EP-270Ambient curing Glue
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: EP-270Ambient curing
In order to obtain good measurement data, the strain gauge must be fully bonded to the material under measure.
It is important to choose and use an adhesive that is suitable for the material to be measured, the material of the gauge base, and the measurement conditions.
*This is an external site.
Specification
type | Curable at room temperature |
---|---|
Operating temperature range | -269~30 |
Main applicable materials | ・Metals (iron, stainless steel, aluminum alloy, etc.) |
Hardening conditions | ・Pressurized (50±20kPa) at about 25°C for 24 hours |
classification | Epoxy two-component mixed type |
capacity | 50g (main agent: 25g, curing agent: 25g) |
forte | ・Suitable for bonding strain gauges in strain measurement up to cryogenic temperatures. |
Main applicable gauges | KFLB |
Remarks
Note: The operating temperature range is the adhesive itself and varies depending on the combination with the gauge. Before use, please read the attached instruction manual carefully before use.
Related Products
-
Kyowa SSC-C Water Tube Structure Settlement Gauge
-
Kyowa PHB-A-50MP PHB-A High/Low-temperature Pressure Transducer
-
Kokosha RSI Series Water-tight Type Switch With Receptacle
-
Kanetec PC-10 Magnetic Polarity Checker
-
Asahi Bagnall Club Collector 100A
-
Watanabe A1000 Series A1□1C Digital Panel Meter for temperature measurement (thermocouple) – Thermometer