Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa ASW-2A ASW-A Waterproof Acceleration Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: ASW-2A
The ASW-A is an oil damping type waterproof acceleration transducer. It can withstand against water pressures up to 490 kPa.
Features
• Measurement under water or ground possible
• Corrosion-resistant models made of stainless steel are available.
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | ±19.61m/s2(±2G) |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Rated Output | 0.5mV/V or more |
Environmental Characteristics
Safe Temperature | -15 to 65℃ |
---|
Electrical Characteristics
Safe Excitation | 6V AC or DC |
---|---|
Recommended Excitation | 1 to 3V AC or DC |
Input Resistance | 122 Ω ±1.6% |
Output Resistance | 122 Ω ±1.6% |
Cable | 4-conductor (0.08 mm2) chloroprene shielded cable,4 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M(Shield wire is connected to the case.) |
Mechanical Properties
Safe Overloads | 300% |
---|---|
Frequency Response | DC to 60Hz at 23℃ (Sensitivity deviation ±5%) |
Transverse Sensitivity | 4% RO or less |
Water Pressure Resistance | 490.3 kPa |
Materials | Case: Corrosion-resistant aluminum, anode oxidized coated |
Weight | Approx. 40 g (Excluding cable) |
Dimensions
Remarks
The acceleration transducer is subject to a constant acceleration in the direction of gravity, therefore measurement is restricted, taking into account this vertical movement (9.807m/s 2).
For the ASW-1A, if sensitivity for vertical acceleration is set in line with the direction of gravity, then the rated capacity will be exceeded in the + direction. As long as the safe overload rating is not exceeded, there will be no damage, but characteristics will be outside the guaranteed range.
Related Products
-
NFK NK-6900 Expansion Joints (General-Purpose Type)
-
Chiyoda Seiki SG-24A Small/Medium/Large flow/Pressure regulator/Governor Small/medium/large flow Rate Governor (primary pressure: 0.5 to 30.0 kPa/set pressure 0.25 to 20.0 kPa)
-
SAKUSAKU EHB421280 Square End Mill 4-Flute
-
Tohnichi QL-MH Adjustable Torque Wrench
-
KANSAI WRB (Bolt And Nut Type) Lightweight Wide Shackle
-
TONE NA43, NA46 Impact Socket Adaptor