Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa LSA-A-200NS1 LSA-A-S1 Gear-change Lever Operating Force Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: LSA-A-200NS1
Few errors by different gripping ways.
Applied to a gear-change lever for floor shift, the LSA-A-S1 measures 2-component force generated by operating the gear-change lever.
Features
●Compact & lightweight, easy to install and handle
●Accurate measurement with minimal mutual interference
Specifications
Performance
Rated Capacity | 200 N for both Fx and Fy |
---|---|
Nonlinearity | Within ±0.5% RO |
Hysteresis | Within ±0.5% RO |
Rated Output | Approx. 0.5 mV/V (For both Fx and Fy) |
Environmental Characteristics
Safe Temperature | -10 to 60ºC |
---|---|
Compensated Temperature | 0 to 40ºC |
Temperature Effect on Zero | Within ±0.05% RO/ºC |
Electrical Characteristics
Safe Excitation | 10 V AC or DC |
---|---|
Recommended Excitation | 1 to 8 V AC or DC |
Input Resistance | 175 Ω ±2% |
Output Resistance | 175 Ω ±2% |
Cable | 4-conductor (0.05 mm2) chloroprene shielded cable, 3 mm diameter by 3 m long, terminated with connector plugs PRC03-12A10-7M (2 pieces provided) (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 120% (For both Fx and Fy) |
---|---|
Interference | ±5% RO (Between Fx and Fy) |
Weight | Approx. 100 g |
Dimensions
Related Products
-
Kyowa PAL-20KB PAL Current-output Pressure Transducer
-
Obishi Keiki Seisakusho Granite High Block
-
Saitama Seiki U-TOOL U-521 2″ Mini Double Action Sander
-
Kyowa PHS-B-1MP PHS-B Highly Reliable Pressure Transducer (Sputter-gage Type)
-
Japan Clamp JSG Lifting Clamp (Single Hole)
-
BIX BH-5VT/BH-5VB/BH-5VBM Small Electric Driver Bits