- Home
- Products
- Nippon Chemical Screw PEEK/MPB(Inner diameter-Outer diameter-free length) PEEK/cutting spring
Japan, Nippon Chemical Screw
Nippon Chemical Screw PEEK/MPB(Inner diameter-Outer diameter-free length) PEEK/cutting spring
Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK/MPB(Inner diameter-Outer diameter-free length)
polyetheretherketone cutting spring.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| Inner diameter | 3 | 4 | 4 | 5 | 5 | 6 | 6 | 6 | 7 | 7 | 7 | 8 | 8 | 8 | 8 | 9 | 9 | 9 | 9 | 10 | 10 | 10 | 10 | 10 | |
| Outer diameter | 5 | 6 | 6 | 7 | 7 | 8 | 8 | 8 | 9 | 9 | 9 | 10 | 10 | 10 | 10 | 11 | 11 | 11 | 11 | 12 | 12 | 12 | 12 | 12 | |
| free length | 5 | 5 | 10 | 5 | 10 | 5 | 10 | 15 | 5 | 10 | 15 | 5 | 10 | 15 | 20 | 5 | 10 | 15 | 20 | 5 | 10 | 15 | 20 | 25 | |
| Close contact length | 3.2 | 3.3 | 6.5 | 3.4 | 6.4 | 3.4 | 6.5 | 9.7 | 3.4 | 6.6 | 9.6 | 3.4 | 6.6 | 9.3 | 12.1 | 3.4 | 6.5 | 9.7 | 12.7 | 3.4 | 6.8 | 9.4 | 12.2 | 15.2 | |
| spring constant | 1.03 | 0.54 | 0.3 | 0.31 | 0.17 | 0.19 | 0.11 | 0.07 | 0.15 | 0.07 | 0.04 | 0.1 | 0.051 | 0.034 | 0.026 | 0.08 | 0.037 | 0.025 | 0.017 | 0.06 | 0.028 | 0.019 | 0.014 | 0.011 | |
| ─ | ─ | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |
Sales unit Quantity
- Spring constant (N/mm), adhesion length, and spring constant are reference values.
- Durability and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions.
- Constant of sprong (N/mm)
- Closed length and spring rate are reference values.
- Since durability and chemical resistance change based on usage conditions, please test under actual usage conditions beforehand.
Torsional rupture torque
| ─ |
Tensile rupture force
| ─ |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
