Nissan Tanaka
NISSAN TANAKA TORR-2300 Pressure Regulator For Semiconductors
Manufacturer: Nissan Tanaka
Model: TORR-2300
High-pressure, standard model for primary side high pressure: TORR-2300
Features
- The TORR series has gained high trust due to its long track record and is synonymous with “semiconductor gas pressure regulators.”
- Assembly is conducted in a class 1000 cleanroom with all 0.3μm standards.
- A filter is built into the flow path of the primary chamber to reduce internal leakage.
- Includes a helium leak test among the comprehensive shipment inspections.
- Production of electrolytic polishing specifications is possible (surface roughness of gas-contacting metal parts Ra 0.25μm).
- The TORR-2300 series is used as a medium-flow model for primary high-pressure, requiring more flow than the TORR-1300, in primary pressure reduction facilities for high vapor pressure liquefied gases.
Basic Specifications
Use materials
Gas connection part
Main body: SUS316L
Diaphragm: SUS316L
Filter: SUS316
Pressure Gauge: SUS316L (Threaded Connection)
Joint or fitting: SUS316L (Welded connection)
Other gas contact parts: SUS316L, SUS316, Fluororesin
Non-contact gas part
Cap: C3604
Pressure regulating handle: C3604
Performance
Inlet side maximum working pressure: 20MPa
Outlet side maximum working pressure: 1.0MPa
Maximum flow rate: 1,400L/min(nor)(P1=8MPa, P2=1.0MPa, N₂ GAS)
Operating temperature: -5~40℃
Weight: 1.8kg (4 ports)
Built-in filter filtration degree: 20μm
Diameter of inlet and outlet ports: 1/4″
External leak amount: 1.3×10-9Pa・m3/sec below (Threaded Connection) & 1.3×10-10Pa・m3/sec below (Welded connection)
Flow Characteristics Diagram
Appearance
Description
Designated Attention
※1 The “SH” series, which uses a high corrosion-resistant alloy of Ni-Cr-Mo alloy for the metal parts in contact with gas, cannot accommodate certain requirements. The Ni-Cr-Mo alloy is equivalent to the American Haynes company’s “Hastelloy C-22.”
※2 In cases without a primary side pressure gauge, the symbol will be B5.
Operating Pressure | Symbol |
---|---|
~15MPa | B5 |
~20MPa | C5 |
※3 In cases without a secondary side pressure gauge, the symbol will vary depending on the pressure used.
Operating Pressure | Symbol |
---|---|
~0.2MPa | 03 |
~0.4MPa | 06 |
~0.6MPa | 10 |
~1.0MPa | 15 |
※ 4 Only fitting type S (Swagelok) can be selected.
※5 For other shapes, different symbols will be used.
※6 When using italic fittings, the structure will fundamentally be a welded connection. For other types of fittings, the structure will fundamentally be a threaded connection.
※7 Only fitting types S (Swagelok) and F (Finelok) can be selected.
※8If W (weld connection) is chosen for structure ②, M6R and M6L cannot be selected. W2R, W2L, and BHE will be treated as special products.
※9 Even when using the “SH” series, the material of the metal parts in contact with the gas of the pressure gauge will be SUS316L. If you require a pressure gauge with Ni-Cr-Mo alloy contact gas metal parts, please contact us.
⚠️Warning: For correct usage, please make sure to read the ‘Instruction Manual’ carefully before use.
Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka
Related Products
-
NISSAN TANAKA 0 Series Analytical Pressure Regulators
-
NISSAN TANAKA PMG-M0050/M0100 Gate-Type Picking Machine
-
Nissan Tanaka JKO-O2 Ver.3 Series Oxygen Monitor
-
NISSAN TANAKA LMZV Oscillator Controlled Laser Cutting Machine
-
NISSAN TANAKA Wing H200, Wing L200 Industrial Pressure Regulator
-
NISSAN TANAKA Lead Burning Torch