Aichi, Japan
Aichi SH17BFS SKYMASTER
Made in Japan
Manufacturer: Aichi Corporation
Model: SH17BFS
Specifications
| SPECIFICATION | |
|---|---|
| MODEL | SH17BFS |
| INSULATION CAPABILITY | 35 kV / unit rate |
| BUCKET | |
| RATED LOAD | 250 kg or two persons |
| MAX. FLOOR HEIGHT | 16.6 m with bucket slide 0.5 m |
| MAX. OUTREACH | 10.2 m with outrigger fully extended and the bucket load with 100 kg |
| MATERIAL | FRP |
| WITHSTAND VOLTAGE | 25 kV / 5 min. |
| INNER DIMENSION | L 0.73 x W 1.05 x H 0.9 (m) |
| BUCKET ROTATION | L: 100 deg / R: 100 deg |
| BUCKET LINER | |
| MATERIAL | Polyethylene |
| WITHSTAND VOLTAGE | 50 kV / 5 min. 25 kV / 5 min. (optional) |
| INNER DIMENSION | L 0.68 x W 1.01 x H 0.9 (m) |
| WINCH & SUB-BOOM | |
| HOISTING CAPACITY | 490 kg |
| HOISTING HEIGHT | 18 m (Elevation Angle: 60 deg) |
| ROPE SPEED | 35 m / min. |
| BOOM | |
| THE 3rd BOOM MATERIAL | FRP |
| THE 3rd BOOM INSULATION | 100 kV / 5 min. |
| LENGTH | 5.735 – 14.295 (m) |
| EXTENSION SPEED | Up: 8.56 m / 40 sec. Down: 8.56 m / 30 sec. |
| ELEVATION ANGLE | -16.5 – 81 deg |
| ELEVATION SPEED | Up: -16.5 deg – 81 deg / 40 sec. Down: -16.5 deg – 81 deg / 30 sec. |
| ROTATION ANGLE | 360 degrees continuous |
| ROTATION SPEED | 1.2 rpm |
| OUTRIGGER | |
| Outrigger Width | 1.71 – 3.35 m |
| SAFETY DEVICES | |
| Hydraulic safety devices (relief valve, pilot check valves on jack cylinders, holding valves on elevation and extension cylinders, bucket leveling system), emergency stop switch, AMCS, AMCS monitor, jack-boom interlock system, pre-programmed cabin and toolbox avoidance system, anchor for safety belt, starting check-up switch, joy stick lever with enable function | |
| OTHER DEVICES | |
| Upper hydraulic outlet, earth reel, upper battery charging device, level gage, boom automatic stowage system, engine start-stop switch | |
| STANDARD ACCESSORIES | |
| Jack bases (4pcs), wheel chocks (4pcs), working light (1pc), bucket cover, winch cover, standard tool kit | |
| SPECIAL OPTIONS | |
| Upper booster, control panel illumination, FRP tool box | |
Related Products
-
Niigata Seiki DL-D3/ DL-S2/ DL-P1/ DL-P3/ DL-P6 SEPARATE SYSTEM / LEVELNIC CABLE
-
Okazaki Seiko SED2LA / SED2L Coated Solid Carbide Long Square Endmills (2 Flutes)
-
Obishi Keiki Seisakusho SA-164 Housing Internal Diameter Automatic Measuring Equipment
-
Hammer Caster 439E-UR Big Size Urethane Thermoplastic Wheel
-
Fukuda E Pump Equipped with Inverter-Integrated Motor Grundfos Pump
-
Chiyoda Seiki LA-8/LP-8 For Dry Type Safety Device – Gas Collection Device – Piping Installation
