Asahi Weldex, Japan
Asahi Weldex CS-V Fillet/Butt Multi Curved Welder
Product Made in Japan
Manufacturer: Asahi Weldex
Model: CS-V
CS-V Fillet/Butt Multi-Curved Welding Carriage (Rail Integrated Weaving Welding Trolley/Rail Travelling Carriage)
Features CS-V
Butt/Fillet welder for Curved workpieces driving on the Flexible rail and easy to control by local panel and remote controller.
Touch sensors stop carriage travel and welding while activating.
Min. above 3 meter bending radius of the rail and easy to in-line by Magnet On-Off switch.
Minimized gear backlash offers various constant speed/adjustable controls precisely thus the highest quality welding and a long life by means of a Special Motor with a Reducer.
The weaver controls the width and can get weaving width as wanted and gets quality welding.
Magnet release handle offers easy-to-mount and dismount
Specifications
| General | |
|---|---|
| Input Power | AC 100V-240V, 50/60Hz |
| Size (W×L×H) | 247(W) × 394(L) × 315(H) |
| Weight | 9kg (body 6kg + rail 3kg) |
| Body | |
| Driving Method | RACK PINION Guide Rail |
| Running Speed | 0 to 88 cm/min ±5% |
| Travel Motor | DC24V, 12W, 5,000RPM BLDC Motor |
| Torch Adjuster | |
| Left-Right Direction | ±45 degrees |
| Working Angle | ±15 degrees |
| Up/Down Distance | 0-35mm |
| Front/Back Distance | 0-35mm |
| Weaver | |
| Motor | DC24V, 12W, 5,000RPM BLDC Motor |
| Decelerator | 400:1 |
| Weaving Width | ±4 degrees |
| Weaving Speed | 0-5 rpm/min |
| Left/Right Stop | 0.0 to 9.9 (sec) |
| Center Shift | 0 to 360 degrees |
| Remote control Operating Distance | 10m |
| Remarks | A wireless remote control is included. |
Related Products
-
Vessel No.6300 “CRYSTALINE” Screwdriver (Long Shank Type)
-
Kaneko Sangyo KL400 Series Dial Type Field Indicating Liquid Level Gauges
-
UHT Corporation CS70-6 #600 Black Ceramic Stones
-
MIKASA MT-66HL Tamping Rammer
-
Chiyoda Seiki MB-10/MB-15 Medical Oxygen Cylinder Pressure Regulator With Humidifier Oxygen Cylinder Pressure Regulator With Humidifier For Medical Use (Primary pressure: 15.0 MPa or less / Adjusted pressure: 0.2 MPa, Flow rate adjustment: 1 to 10 ℓ/min, 1 to 15 ℓ/min)
-
Kurimoto C2F-55G Forging Press
