Daiwa Kenko, Jack, Japan, Lifting
Daiwa Kenko DN Type Preload Jack (Double Acting Type)
Manufacturer: Daiwa Kenko
Model: DN30; DN40; DN50
This DN type of preload jack has a return function, has large oil pressure, and therefore has a wide range of use.
It is used for many purposes such as preloading, refilling of girders, underpinning, bulking and relocation of bridges and building structures, and loading tests.
The axial force of the girder can be measured by attaching an axial force measuring device (PGB).
Specification
| Model No | DN30 | DN40 | DN50 | |
|---|---|---|---|---|
| Applicable beam size | H300 | H350 | H400 / H500 | |
| Plate hole dimensions A x B | mm | 200 x 200 | 250 x 250 290 x 290 | 290 x 290 |
| Oil pressure | KN (tf) | Push 1,000 (100) | Push 2,000 (200) | Push 3,000 (300) |
| KN (tf) | Return 50 (5) | Return 50 (5) | Return 50 (5) | |
| Screw yield strength | KN | 2,500 | 3,500 | 4,500 |
| tf | 250 | 350 | 450 | |
| Stroke: S | mm | 150 | 150 | 150 |
| Machine height: C (no adjustment material) | mm | 485 | 485 | 485 |
| Weight (without adjustment material) | ㎏ | 180 | 290 | 400 |
| Weight (with adjustment material) | ㎏ | 240 | 374 | 510/660 |
| Pressure receiving area | ㎠ | 132.67 | 268.67 | 415.27 |
| Axial force measurement | KN | 1,000 | 2,000 | 3,000 |
| tf | 100 | 200 | 300 | |
| The maximum amount of oil | L | 2 | 4.1 | 6.3 |
| Dimension | ||||
Combination example
Strength test
Adjusting Material
Handling instructions
PGB pressurization by manual pump DPC-DN (video)
Pressurization procedure by manual pump DPC-DN (video)
Decompression procedure using manual pump DPC-DN (video)
Instructions for vertical use
Related Products
-
272 60×48.6 Swivel Square Round Clamp
-
Saitama Seiki U-TOOL U-551SD 5″ Double Action Sander Light-weight
-
Ascon ACR Series Remote Control Standard Air Blast Machine
-
Tajima HSW-50 Engineer Super Wide Width 13mm Length 50m Tension 100N
-
Organo OLLITE F High Performance Fluorine Adsorbent
-
UNIKA AS Type Weld Anchor
REQUEST QUOTATION
PAYMENT
LINK
