Eisen, Japan
Eisen ECS Series Pin Gauge
Made in Japan
Manufacturer: Eisen Co., Ltd.
Model: ECS Series
Pin gauge set (with handle) made of fine ceramics (zirconia)
About the Series
Precision and specifications
| Nominal size (mm) | tolerance | Gauge length (mm) | Handle length (mm) | Roundness diameter variation |
|---|---|---|---|---|
| 0.20mm to 0.49mm | ±1 μm | 10.00 | 25.00 | 0.8 μm |
| 0.50mm to 0.99mm | ±1 μm | 20.00 | 25.00 | 0.8 μm |
| 1.00mm to 10.00mm | ±1 μm | 30.00 | 26.00 | 0.8 μm |
| 10.01mm to 20.00mm | ±1.5 μm | 30.00 | 20.00 | 1.3 μm |
Up to 1.49mm, the nominal dimensions are displayed on the plastic case.
For dimensions 1.50 mm or more, the nominal dimensions are laser engraved on the pin gauge.
For the handle specifications of the ECS series, please refer to the ES series.
Series Details
| Set number (item number) | Jumping dimensions | Set contents Nominal dimensions (mm) | Number of sets |
|---|---|---|---|
| ECS-0A | 0.01 mm | 0.20 0.21 … 0.49 0.50 | 31 |
| ECS-0B | 0.01 mm | 0.50 0.51 … 0.99 1.00 | 51 |
| ECS-1A | 0.01 mm | 1.00 1.01 … 1.49 1.50 | 51 |
| ECS-1B | 0.01 mm | 1.50 1.51 … 1.99 2.00 | 51 |
| ECS-2A | 0.01 mm | 2.00 2.01 … 2.49 2.50 | 51 |
| ECS-2B | 0.01 mm | 2.50 2.51 … 2.99 3.00 | 51 |
| ECS-3A | 0.01 mm | 3.00 3.01 … 3.49 3.50 | 51 |
| ECS-3B | 0.01 mm | 3.50 3.51 … 3.99 4.00 | 51 |
| ECS-4A | 0.01 mm | 4.00 4.01 … 4.49 4.50 | 51 |
| ECS-4B | 0.01 mm | 4.50 4.51 … 4.99 5.00 | 51 |
| ECS-5A | 0.01 mm | 5.00 5.01 … 5.49 5.50 | 51 |
| ECS-5B | 0.01 mm | 5.50 5.51 … 5.99 6.00 | 51 |
| ECS-6A | 0.01 mm | 6.00 6.01 … 6.49 6.50 | 51 |
| ECS-6B | 0.01 mm | 6.50 6.51 … 6.99 7.00 | 51 |
| ECS-7A | 0.01 mm | 7.00 7.01 … 7.49 7.50 | 51 |
| ECS-7B | 0.01 mm | 7.50 7.51 … 7.99 8.00 | 51 |
| ECS-8A | 0.01 mm | 8.00 8.01 … 8.49 8.50 | 51 |
| ECS-8B | 0.01 mm | 8.50 8.51 … 8.99 9.00 | 51 |
| ECS-9A | 0.01 mm | 9.00 9.01 … 9.49 9.50 | 51 |
| ECS-9B | 0.01 mm | 9.50 9.51 … 9.99 10.00 | 51 |
| ECS-10A | 0.01 mm | 10.00 10.01 … 10.49 10.50 | 51 |
| ECS-10B | 0.01 mm | 10.50 10.51 … 10.99 11.00 | 51 |
| ECS-11A | 0.01 mm | 11.00 11.01 … 11.49 11.50 | 51 |
| ECS-11B | 0.01 mm | 11.50 11.51 … 11.99 12.00 | 51 |
| ECS-12A | 0.01 mm | 12.00 12.01 … 12.49 12.50 | 51 |
| ECS-12B | 0.01 mm | 12.50 12.51 … 12.99 13.00 | 51 |
| ECS-13A | 0.01 mm | 13.00 13.01 … 13.49 13.50 | 51 |
| ECS-13B | 0.01 mm | 13.50 13.51 … 13.99 14.00 | 51 |
| ECS-14A | 0.01 mm | 14.00 14.01 … 14.49 14.50 | 51 |
| ECS-14B | 0.01 mm | 14.50 14.51 … 14.99 15.00 | 51 |
| ECS-15A | 0.01 mm | 15.00 15.01 … 15.49 15.50 | 51 |
| ECS-15B | 0.01 mm | 15.50 15.51 … 15.99 16.00 | 51 |
| ECS-16A | 0.01 mm | 16.00 16.01 … 16.49 16.50 | 51 |
| ECS-16B | 0.01 mm | 16.50 16.51 … 16.99 17.00 | 51 |
| ECS-17A | 0.01 mm | 17.00 17.01 … 17.49 17.50 | 51 |
| ECS-17B | 0.01 mm | 17.50 17.51 … 17.99 18.00 | 51 |
| ECS-18A | 0.01 mm | 18.00 18.01 … 18.49 18.50 | 51 |
| ECS-18B | 0.01 mm | 18.50 18.51 … 18.99 19.00 | 51 |
| ECS-19A | 0.01 mm | 19.00 19.01 … 19.49 19.50 | 51 |
| ECS-19B | 0.01 mm | 19.50 19.51 … 19.99 20.00 | 51 |
We also sell them individually. We can also manufacture special sizes.
There is no set grade.
Related Products
-
NMC HYP-N-CU Rust Preventive For Copper And Brass
-
Arimitsu FO Type Super High Pressure Plunger Pump Unit
-
Ascon AHB type (turboblower type) recovery machine
-
TONE 4A-LLN Wheel Nut Socket For Impact Wrench (Thin, Long Type)
-
YOSHITAKE TA-16CVS Air Vent Valve
-
Murata Conductor And Conductor Band Support Fittings
