Eisen, Japan
Eisen LLM Series Single Crystal Diamond Tool Mueller End Mill (Square)
Made in Japan
Manufacturer: Eisen Co., Ltd.
Model: LLM Series
About the Series
Mueller End Mill Square Type LLM Series
This tool uses a sharp blade on the nanometer level to perform mirror finishing (photosensitive drums, acrylic resin) and fine groove processing (holograms, diffraction gratings, lens sheet molds).
We use synthetic single crystal diamond.
Shape
| Center Cut | φD | l | φY |
|---|---|---|---|
| can be | φ1～4 | ～4 | 4–12 |
| none | φ1～12 | ～4 | 12 |
Series Details
TYPE-1 (with center cut)
| Part number | name | type | Outer diameter φD | Blade length T | Neck length L1 | Shank diameter φY | Overall length L |
|---|---|---|---|---|---|---|---|
| LLM-1.0 | 1-blade LLM φ 1.0 end mill | Type I | 1.0 | 1.5 | 1.5 | 4–6 | 50–80 |
| LLM-1.5 | 1-blade LLM φ 1.5 end mill | 1.5 | |||||
| LLM-2.0 | 1-blade LLM φ 5.0 end mill | 2.0 | 2 | 2.5 | |||
| LLM-3.0 | 1-blade LLM φ 3.0 end mill | 3.0 | 3 | Four | |||
| LLM-4.0 | 1-blade LLM φ 4.0 end mill | 4.0 | Four | 6 | 50 – 100 | ||
| LLM-5.0 | 1-blade LLM φ 5.0 end mill | 5.0 | 4.5 | 8 | 5–6 | ||
| LLM-6.0 | 1-blade LLM φ 6.0 end mill | 6.0 | 3 | Ten | 6–10 | 50 – 150 | |
| LLM-8.0 | 1-blade LLM φ 8.0 end mill | 8.0 | 3 | 15 | 8–10 | ||
| LLM-10.0 | 1-blade LLM φ 10.0 end mill | 10.0 | 3 | Ten | 50 – 200 |
TYPE-2 (without center cut)
| Part number | name | type | Outer diameter φD | Blade length T | Neck length L1 | Shank diameter φY | Overall length L |
|---|---|---|---|---|---|---|---|
| LLM-4.0 | 1-blade LLM φ 4.0 end mill | Type II | Four | Four | 6 | 4–6 | 50 – 100 |
| LLM-5.0 | 1-blade LLM φ 5.0 end mill | Five | 8 | 5–6 | |||
| LLM-6.0 | 1-blade LLM φ 6.0 end mill | 6 | Ten | 6–8 | 50 – 150 | ||
| LLM-8.0 | 1-blade LLM φ 8.0 end mill | 8 | 15 | 8–10 | |||
| LLM-10.0 | 1-blade LLM φ 10.0 end mill | Ten | Ten | 50 – 200 | |||
| LLM-12.0 | 1-blade LLM φ 12.0 end mill | 12 | 20 | 12 | |||
| LLM-14.0 | 1-blade LLM φ 14.0 end mill | 14 | 14 | ||||
| LLM-16.0 | 1-blade LLM φ 16.0 end mill | 16 | 16 | ||||
| LLM-18.0 | 1-blade LLM φ 18.0 end mill | 18 | 18 | ||||
| LLM-20.0 | 1-blade LLM φ 20.0 end mill | 20 | twenty five | 20 | |||
| LLM-25.0 | 1-blade LLM φ 25.0 end mill | twenty five | twenty five | ||||
| LLM-30.0 | 1-blade LLM φ 30.0 end mill | 30 | 30 | ||||
| LLM-32.0 | 1-blade LLM φ 32.0 end mill | 32 | 32 | ||||
| ↓ | ↓ | ||||||
| LLM-100.0 | 1-blade LLM φ16.0 end mill | 100 | 100 |
Related Products
-
Asahi Bagnall Cat.No.840 Club Collector
-
HANKOKU N-BQR Motor Siren (Three Phase)
-
SENSEZ HM-200.HM-300 Immersion-type Water Level Sensors
-
Seiwa E04FD070505 FD Type Ferrite Cores for FPC
-
Ross Asia Large capacity series Port sizes from 3/4″ to 1-1/2″
-
Takeda Machinery TCN-256B Sheet Metal Working Machin Hydraulic Corner Shear
