Products Made In Japan
Manufacturer: EXEN
Model: RKD40PA

Direct type hammer ring equipment for widespread applications

It has been used in this way

• 01. Food factory RKD used when removing chocolate from formwork in chocolate factory
• 02. Elimination of wall adhesion of tumble dryers
• 03. Excess paint removal for powder coating
• 04. Prevention of wall surface adhesion for heating furnaces, knocking off welding sputtering, and prevention of workpiece adhesion on the mesh in the drying furnace
• 05. Used for engraving
• 06. Moisture drop of the base

• Features

• The air-type relay knocker series (direct type) is a unique device in which the piston directly and forced the hopper wall surface etc. with the force of compressed air, and the impact eliminates the adhesion and blockage prevention of powders. In addition, since it can be used only by air supply, it is excellent in safety and economy, and can be used with peace of mind without hindrance to powders with the property of sticking when centrilytic force is given. In the case of the vibe type, it is a type that strikes the fixed position knocker base attached, but it can hit what comes moving, move the knocker itself to hit, and the application will spread with one idea. In addition, it can be used in the same way as vibe type.

• Dimensions, installation and operation panel

  Product dimension diagram

  

• High strength adoption improves durability

  

  The blow force can be varied by adjusting the supply air pressure.

• Relay piping of multiple simultaneous use is possible.

  Oil-free, drive-free and eco-friendly

  Simple construction and high durability

  Large knocker to eliminate blockages

  Knocker mounting method

• Operating principle of relay knocker

  1. Compressed air flowing into the knocker is first supplied to the valve chamber, and the umbrella valve is pushed down and stored in the storage chamber.
  2. When the three-way valve is activated to exhaust the air in the valve room, compressed air in the storage chamber moves the umbrella valve up.
  3. When the umbrella valve moves, compressed air in the storage chamber pushes the piston down and hits the base surface.
  Its impact force eliminates adhesion and blockage of powders.

•  

   

  Specification

  Model	Pressure used (MPa)	Strike cycle (times/min)	Air consumption (L/time (ANR))	Strike Energy (N/m)	Impact force		Mass (kg)
  					(kg/m/s)	Equivalent Hammer (pounds)
  RKD30PA	0.3 ～ 0.7	1～60	0.05～0.13	5.5～13.1	1.2～1.8	1 or less	2.1
  RKD40PA			0.15～0.37	9.22～22.3	2.6～4.0	1～1.5	5.6
  RKD60PA			0.33～0.77	20.6～49.0	6.9～10.6	1.5～3	13.1
  RKD80PA			0.60～1.40	45.1～109	15.2～23.7	3～8	18.4
  RKD100PA			0.98～2.28	82.4～201	30.0～46.9	6～15	35.5
  RKD120P		1～6	3.32～6.64	131～321	52.0～84.0	Twice the equivalent of 100PA	52.6