Japan
FK-HP Cam Systems Hand Press
Product Made In Japan
Model: FK-HP200EX/FK-HP500EX/FK-HP800EX
The cam system hand press is a hand press that uses the cam principle (the theory of converting rotational motion into reciprocating motion). You can obtain great power that was not possible with conventional lever applications and rack-type hand presses. (Maximum pressurization capacity is about 200 kg for FK-HP200, about 500 kg for FK-HP500, FK
-HP800 is about 800kg. )
Since it is a manual type, there is no hassle, it is easy to set, and you can start working immediately. Various work such as making ring-shaped packing and caulking is possible, including drilling round, long holes, squares, and deformed holes. It is a simple set that just attaches a special blade punch to the holder, and of course you can freely set the open height handle, etc., so it is versatile and supports a wide range of work. It is also a big feature that it is small, does not take up space, and does not make sound during work.
Cam Systems Hand Press
Easy-to-use mini press
Cam System Hand Press HP200EX
Drilling ability | Unit: mm | |||
Rubber | paper | Iron plate | Copper plate | Joint sheet |
4 | 2 | 0.1 | 0.1 | 1 |
Ability when using a spare blade punch 20 mm
It is the smallest and lightest type among the three hand press models. Despite its compact form, it is extremely powerful for light work. Especially suitable for punching documents.
● Pressurizing capacity 250 kg
● Stroke 11 mm
● Open height 55mm-90mm
● Table area 70 mm x 170 mm
● Overall height 220 mm
● Weight 3.3 kg
● Accessories Punching base / L wrench set
Cam system standard type of hand press
Cam System Hand Press HP500EX
Drilling ability | Unit: mm | |||
Rubber | paper | Iron plate | Copper plate | Joint sheet |
7 | 4 | 0.1 | 0.2 | 2 |
Ability when using a spare blade punch 20 mm
Standard type of CSH. We support a wide range of work from light work to hard work. If you install the ∩ type handle on P.15, the work efficiency will be further improved.
● Pressurizing capacity 500 kg
● Stroke 15 mm
● Open height 70 mm to 110 mm
● Table area 100 mm x 260 mm
● Overall height 290 mm
● Weight 7.2 kg
● Accessories Punching base / L wrench set
Achieves affordable high power
Cam system hand press HP800EX
Drilling ability | Unit: mm | |||
Rubber | paper | Iron plate | Copper plate | Joint sheet |
12 | 5 | 0.2 | 0.3 | 3 |
Ability when using a spare blade punch 20 mm
The holder and spare blade punch can be used as they are, and if you attach the push blade / receiving blade (punch / die) *, it will be easier to remove the iron plate / copper plate. In addition, processing such as “folding / bending” the iron plate is also possible.
● Pressurizing capacity 800 kg
● Stroke 20 mm
● Open height 70 mm to 190 mm
● Table area 170 mm x 320 mm
● Overall height 420 mm
● Weight 16 kg
● Accessories Punching base / L wrench set