Fuji Tool, Hand Tools, Japan, TOOLS & EQUIPMENT
Fuji Tool Edge Finder Ceramic Type
Product Made in Japan
Manufacturer: Fuji Tool
Features
Used in the spindle of a machine such as a mill to accurately locate the centre of a workpiece.
| Material | Probe:Ceramics（ZrO2） Shank:Steel（SKS） |
|---|---|
| Hardness | HRC58° |
| Repeated Accuracy | ±0.002mm |
Specification
| Code No. | Model | Shank | Probe | Length | Proper Rotation |
|---|---|---|---|---|---|
| 07-703 | CER-10 | φ10 | φ10 | 84 | 500～750rpm |
| 07-704 | CER-32A | φ32 | φ10 | 104 | 500～750rpm |
| 07-803 | CEZ-10 | φ10(19) | φ10 | 80 | 450～600rpm |
The ceramic probe(ZrO2) cuts off magnetism and without iron powder attached. Outstanding wear-resistance.
How to use
1. Equip the shank of the edge finder to a drill chuck or milling chuck; manually shift the probe slightly off its centre and let it rotate eccentrically.
2. Gently move the rotating edge finder closer and closer to the measured workpiece; when contact is established, eccentricity gets smaller. The probe (tip) then stops rotating.
3. Gently shift the probe again to make contact with the workpiece; the probe then will slide along the surface of the workpiece. This position is the reference position distanced 5mm away from the probe diameter.
Related Products
-
Organo LC-SW Seawater Filtration System
-
TERAOKA SEISAKUSHO 560S #3 Nomex(R) Adhesive Tape
-
Ascon Suction TB type nozzle holder set nozzle
-
Chiyoda Seiki EH-50-4/EH-100-4 Carbon Dioxide Gas Pressure Regulator With Electric Heater (with electric heater for carbon dioxide/maximum flow rate: 50ℓ/min, 100ℓ/min)
-
Kaneko Sangyo M65G Series Four-Way Solenoid Valve (Single)
-
Showa Measuring Instruments TCLA-A Displacement Transducers
