Fukuda Seiko, Japan
Fukuda Seiko STC Staggered Blade T-slot Cutter
Made in Japan
Manufacturer: Fukuda Seiko
Model: STC
It is used for grooving, etc., with cutting edges on the outer circumference and sides. It has alternating right and left helix angles and excellent cutting performance. For efficient cutting and powerful cutting of materials with poor machinability.
- Material: HSS-Co (SKH56)
- Blade diameter tolerance:
(D≤16)-0.05 to -0.16
(16<D≤30)-0.065 to -0.195
(30<D≤45)-0.08 to -0.24
(45<D≤100)-0.1 to -0.29
- Blade width tolerance: 0 to +0.1
- Right and left torsion angle: ( L≦20) 15ﾟ, ( L≧21) 12ﾟ
■ Length of both side blades
| Blade diameter | A. | B. |
| 10 | 2.5 | 2 |
| 12 | ||
| 13 | 3 | 2.5 |
| 15 | 3.5 | 3 |
| 16 | 3 | |
| 18 | 3.5 | |
| 19 | ||
| 20 | 4 | 3.5 |
| 22 | 4.5 | 4 |
| 24 | 3.5 | |
| 25 | 5 | 4 |
| 26 | 5.5 | 4.5 |
| 28 | 6 | 5 |
| 30 | ||
| 32 | 6.5 | 5.5 |
| 35 | 7 | 6 |
| Blade diameter | A. | B. |
| 36 | 7.5 | 6.5 |
| 38 | ||
| 40 | 8 | 7 |
| 42 | 8.5 | 7.5 |
| 45 | 9 | 8 |
| 48 | 9.5 | 8.5 |
| 50 | 10 | 9 |
| 55 | 11 | 9.5 |
| 60 | 11 | |
| 65 | ||
| 70 | ||
| 75 | ||
| 80 | 12 | 12 |
| 90 | 13 | 13 |
| 100 | 14 | 14 |
Related Products
-
Vessel No.L-90-E Overhead Ionizing Triple-Fan
-
TONE 4AP-N Wheel Nut Protector Socket For Impact Wrench (Thin Type)
-
Kondotec 60-Angle Pipe Flat Rib Washer
-
Vessel No.GT-S5TB Air Screwdriver Torque Control Type
-
KETT ELECTRIC LABORATORY KJT-CNT2 Controller
-
EYE Iwasaki Electric Lighting Fec Cera Arc Ace Pro
