H.H.H, Japan
H.H.H Crane Sling (Made To Order)
Made in: Japan
Manufacturer: H.H.H
Featured
HHH slings comply with crane safety regulations.
Can be hung with the working load as shown in the table.
Hang so that the load is even.
Please use spacers for parts that come in contact with sharp corners.
Use at hanging angles of 60 degrees or less.
Note: The force will be reduced to about 60%.
Specifications
| Wire Diameter (mm) | Cutting load (tons) | Load (ton) | ||||
| 1 Hook | 2 HooKs | 4 Hooks | ||||
| Straight | 600 | 300 | 600 | |||
| 6 | 1.81 | 0.3 | 0.57 | 0.5 | 0.84 | 0.75 |
| 9 | 4.06 | 0.67 | 1.28 | 1.13 | 1.89 | 1.69 |
| 12 | 6.49 | 1.08 | 2.07 | 1.81 | 3.36 | 3 |
Related Products
-
SAKUSAKU 4SS-20D 1.5S Carbide Square End Mill 4-Flute
-
TONE AIS8500L Air Impact Wrench Straight Type
-
Watanabe WAP-AZ AC converter (photocoupler isolation) – Signal Converter
-
UNIKA BJ Type Cordless Percussion Drill Bit
-
Chiyoda Seiki Intake Valve
-
Kokosha KKS-A0-12 A0 Class Fire-resistant Windows Side Scuttles Welded Type
