Hachiken HF Flange Hose

Made in Japan
Manufacturer : Hachiken
Model : HF

Hose with flanges on both ends.

High flexibility
Due to the special structure, it is flexible.
Reinforced with highly versatile performance wire, it can be used not only for internal pressure but also for negative pressure lines.

Maximum operating temperature : -10 to 60°C
Maximum operating pressure :
<Negative pressure> -60kPa
<Internal pressure> See the performance table
Flange standard : JIS 10K
Inner rubber material : EPDM

※1. Flanges are hot-dip galvanized as standard.

※2. The flange is a fixed type.

Nominal diameter	A.	L.		Mass kg	Maximum working pressure MPa
Nominal diameter	A.	At the earliest	Longest	Standard	Maximum working pressure MPa
20A	19	1000	5000	2.5	1.00
25A	25	1000	5000	3.2	1.00
32A	32	1000	5000	4.0	1.00
40A	38	1000	5000	4.3	1.00
50A	51	1000	5000	5.3	1.00
65A	64	1000	5000	7.0	1.00
80A	76	1000	5000	8.2	1.00
100A	102	1000	5000	11	1.00
125A	127	1000	5000	14	0.50
150A	152	1000	5000	17	0.50
200A	203	1000	5000	22	0.50

※1. Weight is a guideline.

※2. The inside diameter of the mouth of 25A or less is R-processed.

If the fluid is gas, the maximum working pressure will be 1/2 of the above value.
Please contact us for non-standard specifications (diameter, length, etc.).
Due to the manufacturing method, the plating on the flange may be discolored or mottled, but this does not affect performance.

Hachiken, Japan