Chemical, Isolite Insulating, Japan
Isolite Insulating LAP-165 Special Insulating Firebrick
Manufacturer: Isolite Insulating
LAP-165 Special Insulating Firebrick
Features
Special Insulating Firebrick
LAP-165 is low bulk density but high strength brick. LAP-165 has an extremely stable performance under high temperature. Normally, used for Hot Surface and Back-up lining insulation.
Typical Applications
Hot Stove, Ceramics Firing Kiln, Naphtha Cracking Furnace
| LAP-165 | |||
| Specification | Permanent Linear Change Not more than ±0.5% （℃） | 1650 | |
| Bulk Density g/cm³ | 0.90≧ | ||
| Cold Crushing Strength [MPa] JIS R 2615 | 2.9≦ | ||
| Chemical Composition Fe₂O₃ (%) | 1.0≧ | ||
| Test Result | Bulk Density g/cm³ | 0.80 | |
| Cold Crushing Strength [MPa]JIS R 2615 | 4.0 | ||
| Modules of Rupture [MPa]JIS R 2615 | 2.0 | ||
| Thermal Conductivity at 350℃±10℃[W/m・K] JIS R 2616 | 0.35 | ||
| Reheat Shrinkage (%) at 1650℃X8hr JIS R 2613:1985 | 0.18 | ||
| Chemical Composition (%) | Al₂O₃ | 73 | |
| JIS R 2216 | SiO₂ | 25 | |
| Fe₂O₃ | 0.5 | ||
Related Products
-
Watanabe WMS-MG-01 Mounting Magnet (2 pieces)
-
Saitamaseiki AK-500AH Drills, Screwdrivers and Air saw
-
Kitz Class 125 Bronze Y-Pattern Swing Check Valve
-
UHT Corporation Over Hose For Air Mirco Grinder
-
Hammer Caster 505SA-RB, 505SA-WR, 505SA-WRB, 505SA-CHR Rubber Wheel Scaffold Caster
-
SAKUSAKU 2SS-25D 4.0S Carbide Square End Mill 2-Flute
