Japan, Kakuta
Kakuta KCP-22ST Dual Clamp
Product Made in Japan
Manufacturer: Kakuta Co., Ltd
Model: KCP-22ST
DualClamp KCP-22ST(Straight Line w/Lock)
Category | Dual Clamp |
---|---|
Model Number | KCP-22ST |
Weight | 348g |
Holding Capacity | 2.5kN(250kgf) |
Material | Stainless Steel+Others Materials |
Mounting Method | Flange Base |
Surface finish | Body/Cam/Connecting arm/Slide bar:Stainless Steel(Surface is untreated),SPRING:SUS304-WPB , Grip:Plastic(P.P) |
CAD data
Straight Line w/Lock
Feature
Dual clamp realizes high safety and high performance by having a cam mechanism in addition to toggle clamp that can hold a sliding axis by cam.
Dual Clamp have been successfully tested for more than 1 million cycles and hold a workpiece stably for long time that reduce the cost of replacement.
There is a version with safety lock to prevent unclamp by vibration, backlash and mis-operation.
- The grip has been developed based on ergonomics fits to hands and reduce physical burden.
- Need to adjust the bolt length before use.
- Do not use in lathe/turning and at high tempareture as welding.
Caution
- The holding capacity is for reference.
- The holding capacity decrease toward the tip of clamp arm.
- Do not give the shock, vibration and internal pressure which causes a failure.
- Caution to pinch the fingers.
Dual Clamp Instruction
Read before use
<Check before use>
- The holding capacity noted in catalog is for reference.
- The value cannot be guaranteed as it bepends on the condition of use.
- Use caution as the holding force will drop due to depending on the holding position, bolt adjustment and type of bolt uses.
- When selecting and using clamps, allow enough margin for the holding capacity.
<Precaution>
- Mounting Method: Mount by fixing bolts securely.
- Holding Position: It does not hold or clamp on the way of actuating. It only can hold at holding position. (Toggle and cam mechanism at work)
- Lubrication: Apply oil to the slides and friction parts on a regular basis. Chip removing: When using in place where there are chips, remove chips around the main unit, especially the rivets and rotating parts by using an airgun before clamping & unclamping.
- Inspection: Inspect regularly for bolts and nuts that secures the body and clamp arm.
- Operating environment: Using in the corrosive or inappropriate environment causes mulfanction, damage and transform.
- Precaution: Do not insert your hands and fingers in range of the action and wear protective gloves for safety when mounting or operation. Do not use at exceed the holding capacity.
<Note>
- Specification will change for improvement without notice.
- The holding capacity and durability noted in catalogue is maximum value.
- The holding capacity will decrease due to the condition of usage.
- Apply oil to the slides and friction parts on a regular basis.
- Wear protective gloves for safety when mounting or operation.