Product Made in Japan
Manufacturer: Kakuta Co., Ltd
Model: No.02

No.02 (Straight Line)

CAD data

Stroke 30mm

Feature

• A toggle clamp is designed to hold a workpiece by one-action operation after initial setting.
• It is easy to introduce and low cost compare with air or hydraulic.

Application

• Optimal for repetitive work
• For inspection, welding, assembly, machining and press fit.
• You can use for woodworking and DIY.

Caution

• The holding capacity is for reference.
• Do not give the shock, vibration and internal pressure which causes a failure.
• Caution to pinch the fingers.

Toggle Clamp Instruction

Read before use
<Check before use>

• The holding capacity noted in catalogue is maximum value.
• The value cannot be guaranteed as it bepends on the condition of use.
• Use caution as the holding force will drop due to depending on the holding position, bolt adjustment and type of bolt uses.
• When selecting and using clamps, allow enough margin for the holding capacity.

<Precaution>

• Mounting Method: Mount by fixing bolts or by welding securely.
• Test: Before mount, test the action.
• Extension Handle: Using with an extension handle or arm will have a negative effect on durability.
• Holding Position: It does not hold or clamp on the way of actuating. It only can hold at holding position. (Toggle and cam mechanism at work)
• Lubrication: Apply oil to the slides and friction parts on a regular basis.
• Chip removing: When using in place where there are chips, remove chips around the main unit, especially the rivets and rotating parts by using an airgun before clamping & unclamping.
• Inspection: Inspect regularly for bolts and nuts that secures the body and clamp arm, damage and transform.
• Operating environment: Using in the corrosive or inappropriate environment causes mulfanction, damage and transform.
• Precaution: Do not insert your hands and fingers in range of the action and wear protective gloves for safety when mounting or operation. Do not use at exceed the holding capacity.