Product Made in Japan
Manufacturer: Kakuta Co., Ltd
Model: YSP-22ST

Dual clamp YSP-22ST（Straight Line）

CAD data

Straight Line w/Lock

Feature

Dual clamp realizes high safety and high performance by having a cam mechanism in addition to toggle clamp that can hold a sliding axis by cam.
Dual Clamp have been successfully tested for more than 1 million cycles and hold a workpiece stably for long time that reduce the cost of replacement.
There is a version with safety lock to prevent unclamp by vibration, backlash and mis-operation.

• The grip has been developed based on ergonomics fits to hands and reduce physical burden.
• Need to adjust the bolt length before use.
• Do not use in lathe/turning and at high tempareture as welding.

Caution

• The holding capacity is for reference.
• The holding capacity decrease toward the tip of clamp arm.
• Do not give the shock, vibration and internal pressure which causes a failure.
• Caution to pinch the fingers.

Dual Clamp Instruction

Read before use
<Check before use>

• The holding capacity noted in catalog is for reference.
• The value cannot be guaranteed as it bepends on the condition of use.
• Use caution as the holding force will drop due to depending on the holding position, bolt adjustment and type of bolt uses.
• When selecting and using clamps, allow enough margin for the holding capacity.

<Precaution>

• Mounting Method: Mount by fixing bolts securely.
• Holding Position: It does not hold or clamp on the way of actuating. It only can hold at holding position. (Toggle and cam mechanism at work)
• Lubrication: Apply oil to the slides and friction parts on a regular basis. Chip removing: When using in place where there are chips, remove chips around the main unit, especially the rivets and rotating parts by using an airgun before clamping & unclamping.
• Inspection: Inspect regularly for bolts and nuts that secures the body and clamp arm.
• Operating environment: Using in the corrosive or inappropriate environment causes mulfanction, damage and transform.
• Precaution: Do not insert your hands and fingers in range of the action and wear protective gloves for safety when mounting or operation. Do not use at exceed the holding capacity.

<Note>

• Specification will change for improvement without notice.
• The holding capacity and durability noted in catalogue is maximum value.
• The holding capacity will decrease due to the condition of usage.
• Apply oil to the slides and friction parts on a regular basis.
• Wear protective gloves for safety when mounting or operation.