Japan, Kakuta
Kakuta YSP-50ST-L Dual Clamp
Product Made in Japan
Manufacturer: Kakuta Co., Ltd
Model: YSP-50ST-L
DualClamp YSP-50ST-L (Straight Line w/Lock) <Built-to-order>
Category | Dual Clamp |
---|---|
Model Number | YSP-50ST-L |
Weight | 435g |
Holding Capacity | 3.0kN(300Kgf) |
Material | Aluminum+Stainless Steel+Others Materials |
Mounting Method | Flange Base |
Surface finish | Body:Aluminum、others:Stainless Steel(Surface is untreated)、SPRING:SUS304-WPB、Grip:Plastic(P.P) |
CAD data
Straight Line w/Lock
Feature
Dual clamp realizes high safety and high performance by having a cam mechanism in addition to toggle clamp that can hold a sliding axis by cam.
There is a version with safety lock to prevent unclamp by vibration, backlash and mis-operation.
- The grip has been developed based on ergonomics fits to hands and reduce physical burden.
- Need to adjust the bolt length before use.
- Do not use in lathe/turning and at high tempareture as welding.
Caution
- The holding capacity is for reference.
- The holding capacity decrease toward the tip of clamp arm.
- Do not give the shock, vibration and internal pressure which causes a failure.
- Caution to pinch the fingers.
Dual Clamp Instruction
Read before use
<Check before use>
- The holding capacity noted in catalog is for reference.
- The value cannot be guaranteed as it bepends on the condition of use.
- Use caution as the holding force will drop due to depending on the holding position, bolt adjustment and type of bolt uses.
- When selecting and using clamps, allow enough margin for the holding capacity.
<Precaution>
- Mounting Method: Mount by fixing bolts securely.
- Holding Position: It does not hold or clamp on the way of actuating. It only can hold at holding position. (Toggle and cam mechanism at work)
- Lubrication: Apply oil to the slides and friction parts on a regular basis. Chip removing: When using in place where there are chips, remove chips around the main unit, especially the rivets and rotating parts by using an airgun before clamping & unclamping.
- Inspection: Inspect regularly for bolts and nuts that secures the body and clamp arm.
- Operating environment: Using in the corrosive or inappropriate environment causes mulfanction, damage and transform.
- Precaution: Do not insert your hands and fingers in range of the action and wear protective gloves for safety when mounting or operation. Do not use at exceed the holding capacity.
<Note>
- Specification will change for improvement without notice.
- The holding capacity and durability noted in catalogue is maximum value.
- The holding capacity will decrease due to the condition of usage.
- Apply oil to the slides and friction parts on a regular basis.
- Wear protective gloves for safety when mounting or operation.
Related Products
-
TERAOKA SEISAKUSHO 541S 0.18 Glass Cloth Adhesive Tape
-
Tosei Sharyo SUS-SJ Series Gold Caster
-
Organo D-7 HⅡ Commercial Water Purifier
-
Vessel No.TD-54 Watch Band Pin Punch
-
DIJET YPHW100308ZER-15, YPHW100308ZER-F, YPHW100308ZTR-F1 High Precision Insert For Side Finishing
-
MIKI NETSUREN PO819 Single Sided Blow Spanner (65mm)