Japan, Kaneko Sangyo
Kaneko Sangyo M80G Series Four-Way Solenoid Valve (Single)
Manufactuer: Kaneko Sangyo
Model: M80G Series
Summary
Typically, a four-way solenoid valve is used to operate the double-acting cylinder.
Mainly, there are five pipe connecting port, four-way solenoid valve, has become a place 2 1 inlet, 2 outlet, outlet. Because it is always closed, the exhaust port is one of the four direction any functionality.
Single solenoid and has one coil inside, switched switched to its original state, flow direction when the solenoid is energized from a power outage and blackout state.
Feature
Packed type
Free from any fear of burnout or insulation degradation as the coil and movable core do not come into contact with fluid.
Safe explosion-proof construction.
Explosion-proof type valves certified by the Ministry of Labor.
Highly durable.
A mechanical life of five million operations or more is expectable.
Manual check is possible.
Manual operation is possible. This mode can be used for operation check or switching in case of emergency.
Standard specification
FLUID : CLEAN AIR
FLUID TEMPERATURE : -20~60℃
AMBIENT TEMPERATURE: -20~60℃
DUTY CYCLE: 100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE: +10,-15%
WORKING PRESSURE : 0 ~ 0.99MPa
Cv. FLOW FACTOR: 0.58
ELECTRICAL SPECIFICATIONS: See below
ELECTRICAL SPECIFICATIONS
AC | DC | |||
---|---|---|---|---|
V/Hz | INRUSH A | HOLDING A | V | A |
GENERAL PURPOSE TYPE 1, EXPLOSION-PROOF TYPE E1 | COIL INSULATION CLASS : B | |||
100/50 | 2.8 | 0.50 | 24 | 0.91 |
100/60 | 3.1 | 0.56 | 48 | 0.53 |
110/60 | 2.6 | 0.46 | 100 | 0.24 |
200/50 | 1.4 | 0.25 | 110 | 0.26 |
200/60 | 1.6 | 0.28 | 125 | 0.20 |
220/60 | 1.3 | 0.23 |
Product Image
M80G AC GENERAL PURPOSE TYPE
M80G-8 ~ 10 AC GENERAL PURPOSE TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 70 | 222 |
10 | 50 | 222 |
M80G DC GENERAL PURPOSE TYPE
M80G-8 ~ 10 DC GENERAL PURPOSE TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 70 | 242 |
10 | 70 | 242 |
M80G AC EXPLOSION-PROOF TYPE
M80G-8 ~ 10 AC EXPLOSION-PROOF TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 70 | 256 |
10 | 50 | 256 |
M80G DC EXPLOSION-PROOF TYPE
M80G-8 ~ 10 DC EXPLOSION-PROOF TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 70 | 260 |
10 | 70 | 260 |
Related Products
-
DIJET EZN5D Type Strike Drill
-
Organo ORPERSION E400 Slime Control Agent for RO Membranes
-
Watanabe WSP-PTEW 2-output PT converter (true RMS) – Signal Converter
-
Watanabe AH-331 Module type Digital Panel Meter for DC voltage (3+1/2 digits)
-
Osaka Gensokuki Reduction Gear For Rolling Mill Drive
-
Chiyoda Tsusho SLEEVE CONNECTOR ELBOW