- Home
- Products
- Kanetec EP-DV3060/EPS-D2100A Powerful Permanent Electromagnetic Chuck With Vacuum Function
Japan, Kanetec
Kanetec EP-DV3060/EPS-D2100A Powerful Permanent Electromagnetic Chuck With Vacuum Function

Product Made in Japan
Manufacturer: Kanetec
Model: EP-DV3060/EPS-D2100A
Application
We added permanent electromagnetic chucks for cutting, equipped with a grid-seal type vacuum chuck function, to hold workpieces during the cutting and grinding of both magnetic and nonmagnetic workpieces.
Chuck controller and vacuum system required additionally
Features
- The strong holding power makes these chucks suitable for cutting magnetic materials.
- You use electricity only when mounting and demounting workpieces, thus generating minimal heat and saving electricity.
- These chucks, having a construction dedicated to demagnetization, exhibit good workpiece release performance when turned off.
- You can set the vacuum chuck to a desired area using seal rubber according to the workpieces.
- When machining nonmagnetic workpieces, the permanent electromagnetic feature can be utilized to hold magnetic substances around them to secure them firmly.
Specification
Model | Mounting Size | Work Face | Pole Pitch | Mounting Face | ||||||
B1 | L1 | Le | t | B4 | B2 | L2 | h | |||
EP-DV3060 | 300(11.8)×600(23.6) | 310 -12.2 | 638 -25.1 | 558 -21.9 | 35 -1.37 | 92 -3.62 | 42(2+8+2+30) -1.65 | 304 -11.9 | 638 -25.1 | 20 -0.78 |
EP-DV4080 | 400(15.7)×800(31.5) | 410 -16.1 | 806 -31.7 | 726 -28.5 | 79 -3.11 | 404 -15.9 | 806 -31.7 | |||
EP-DV50100 | 500(19.6)×1000(39.4) | 510 -20 | 1058 -41.6 | 978 -38.5 | 87 -3.42 | 504 -19.8 | 1058 -41.6 |
Model | Height | Grid Pitch | Effective Area | Mass | Electro Chuck Master | Applicable Vacuum System |
H | B3~L3 | |||||
EP-DV3060 | 125 -4.92 | 42 (-1.65) x 42 (-1.65) | 252(9.92)× 588(23.1) | 170kg/374lb | EPS-D2100A | VPU-EG VPU-E10 VPU-D20 |
EP-DV4080 | 378(14.8)× 756(29.7) | 280kg/ 617lb | ||||
EP-DV50100 | 462(18.1)× | 450kg/ 992lb | EPS-D2100A-2 |
※The chuck controller, vacuum system and clamp parts are not included.
※The KANETEC chucks work best when a KANETEC chuck controller is used.
※Turning the permanent electromagnetic chucks on and off must be limited to once per several minutes. If on/off operations are repeated frequently, the chucks may be damaged by overheat.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
REX Portable Groover S Groovers For Stainless steel Pipe
-
Matsuda Seiki Ball Press-Fit Caulking Device
-
Chiyoda Seiki EX-100mkII Excellent Mark II (Primary pressure: 20.0 MPa or less/adjustment pressure 0.1 to 1.0 MPa, maximum flow rate: 50 ℓ, 150 ℓ/min・Air)
-
Vessel NO.9900E Micro Screwdriver
-
Kakuta No.X13 Hold Down Clamp
-
KONAN CP611 Pneumatic Cylinder General Standard Type