Japan, Kanetec
Kanetec EPC-120ARF Round Permanent Electromagnetic Chuck
Product Made in Japan
Manufacturer: Kanetec
Model: EPC-120ARF
Highly precise rotary grinding operations realized!
Application
Most suitable for grinding operations by rotary grinders.
Features
Since electricity needs not to be supplied continuously (momentarily supplied only when mounting and demounting workpieces), heat generation and thermal deformation are minimal, thus highly precise machining operations are possible. Also, the running cost is very low and electricity can be saved.
The holding power is maintained by the permanent magnet in the case of such troubles as power failure and cable breakage to enhance safe operations.
In addition to four standard sizes, sizes of φ500 mm minimum and up to φ1500 mm are available.
Can be used in wet operations
A resin-bonded structural face plate having little environmental burden is employed.
EPS-GWB230A
Specification
| [mm(in)] | ||||||||||||||
| Model | Nominal Size | Work Face | Pole Pitch | Mounting Face | Height | Voltage | Mass | Electro Chuck Master | ||||||
| D1 | D2 | de | D2 | K | n | M | Dp | H | ||||||
| EPC- 63ARF | 630 (24.8) | 630 (24.8) | 580 (22.8) | 100 (3.93) | 14 (2+12) 0.55 (0.07+0.47) | 300 (11.8) | 4 (0.15) | 5 | M12 (0.47) | 500 (19.6) | 120(4.72) | 180 VDC | 250kg/ 551lb | EPS- GWB230A |
| EPC- 80ARF | 800 (31.4) | 800 (31.4) | 748 (29.4) | 400 (15.7) | 6 | 650 (25.5) | 410kg/ 904lb | |||||||
| EPC- 103ARF | 1030 (40.5) | 1030 (40.5) | 976 (38.4) | 104 (4.09) | 550 (21.6) | 8 | 850 (33.4) | 680kg/ 1499lb | ||||||
| EPC- 120ARF | 1200 (47.2) | 1200 (47.2) | 1144 (45.0) | 600 (23.6) | 1000 (39.3) | 930kg/ 2050lb | ||||||||
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
Kanetec RMA-2F1530 Powerful Double-Face Holding Permanent Magnetic Block
-
TONE NS2S Short Spinner Handle
-
TONE HTR312 Tornado Socket Set (With Socket Holder)
-
TERAOKA SEISAKUSHO 7051 #12 Transparent Double-coated adhesive film tape
-
Obishi Keiki Seisakusho Rotary Attachment for Gear Deflection Measurement ( SHR Type )
-
SAKUSAKU SDH101322 Blade for Cut-off And Deep Grooving
