Japan, Kanetec
Kanetec KGM-H POWERFUL SQUARE MAGNETIC BAR
Product Made in Japan
Manufacturer: Kanetec
Model: KGM-H (KGM-H20)
A magnetic bar used in a powerful grid type magnet. This bar is available individually also. Casing is made of stainless steel.
How to use
Set a square magnetic bar with its corner in the flow direction of materials as shown.
Not allowed in liquid
The corner marked by ‘UP’ must be up.
Additionally, there’s a visual of a square magnetic bar with a corner marked “UP” to indicate the correct orientation.
| Model | Length (in) | Side Length (in) | Surface Max. Magnetic Flux Density | Working Temp. Upper Limit | Mass |
|---|---|---|---|---|---|
| KGM-H20 | 195 (7.67) | 22 (0.86) | 320mT (3200G) | Approx. 60°C (140° F) | 0.6 kg/1.32 lb |
| KGM-H25 | 245 (9.64) | 22 (0.86) | 320mT (3200G) | Approx. 60°C (140° F) | 0.75kg/1.65 lb |
| KGM-H30 | 295 (11.6) | 22 (0.86) | 320mT (3200G) | Approx. 60°C (140° F) | 0.9 kg/1.98 lb |
| KGM-H35 | 345 (13.5) | 22 (0.86) | 320mT (3200G) | Approx. 60°C (140° F) | 1.1 kg/2.42 lb |
| KGM-H40 | 395 (15.5) | 22 (0.86) | 320mT (3200G) | Approx. 60°C (140° F) | 1.2 kg/2.64 lb |
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
Tokyo Ko-on Denpa 45LT-R2 Series Input, Cross Fader
-
SAKUSAKU SL-42M-D Carbide Rotary Burr Taper Radius End Cone Shape
-
Chiyoda Seiki GS-3000PL Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 1250 m3/h・Air)
-
Eagle Jack (Konno Corporation) GU-100 Hydraulic Claw Jack
-
KONAN MVW7F-04-S 3 Port Solenoid Valves Large-Capacity Poppet-type Normally Closed (Return)
-
Nissho Astec TBS Tubes & Pipes
REQUEST QUOTATION
PAYMENT
LINK
