Japan, Kanetec, Lifting
Kanetec LMU-UW Waterproof Electromagnetic Lifma
Product Made in Japan
Manufacturer: Kanetec
Model: LMU-UW
Application
Electromagnetic type lifting magnets used as a lifting section of cranes and hoists for transportation of steel materials in underwater work environment as well as outdoor work sites.
Features
- You can use these Lifmas underwater up to 3 atm (equivalent to a maximum water depth of 30 meters).
- Remote operation can electronically control the attraction and release of workpieces.
- Additionally, we require a rectifier.
- Using an uninterruptible power supply ensures safety in case of unexpected power failure. (To study specifications, refer to Model LMU’s holding power graphs and lifting reference.)
| Model | Lifting Capacity | Dimensions | Eyebolt ID | Rated Voltage | Rated Current | Mass | Applicable Rectifier | |
| Main Unit | Lifting part height | |||||||
| LMU-UW15 | 600kg/1322 lb | φ156（6.14）×75（2.95） | 130（5.11） | M20（0.78）（φ40（1.57）） | 180 VDC | 0.6A | 13kg/28.6 lb | KR-P203/P208 KR-A203/A208 RH-MW205B/MW210B |
| LMU-UW20 | 1200kg/2645 lb φ | φ206（8.11）×90（3.54） | 175（6.88） | M30（1.18）（φ60（2.36）） | 0.9A | 25kg/55.1 lb | ||
| LMU-UW25 | 1800kg/3968 lb | φ256（10.0）×96（3.77） | 196（7.71） | M36（1.41）（φ70（2.75）） | 1.2A | 45kg/99.2 lb | ||
- A value that is half of the maximum holding power indicates the lifting capacity.
- For workpieces having poor attractive conditions such as scraps and waste materials, use LM-EC2.
- For continuous operation, use the Lifma at 110 VDC or below. Note that when the thickness of steel plates to lift is 20 mm, the listed lifting capacity drops by approx. 20%.
- The height of lifting part is up to the top end of the inside diameter of the eyebolt.
- Including Cable 2 m.
Lifting reference for use of single unit ≪Mill scale soft steel plate≫
| Model | LMU-10D | LMU-15D | LMU-20D | LMU-25D | LMU-30D |
| Thickness | LMU-10SRD | LMU-15SRD | LMU-20SRD | LMU-25SRD | LMU-30SRD |
| 5 | 600（23.6）×600（23.6） | 700（27.5）×700（27.5） | 800（31.5）×800（31.5） | 900（35.4）×900（35.4） | 1000（39.4）×1000（39.4） |
| 9 | 700（27.5）×700（27.5） | 850（33.4）×850（33.4） | 1000（39.4）×1000（39.4） | 1200（47.2）×1200（47.2） | 1300（51.1）×1300（51.1） |
| 12 | 1000（39.4）×1000（39.3 | 1100（43.3）×1100（43.3） | |||
| 16 | 1300（51.1）×1300（51.1） | 1500（59.0）×1500（59.0） | 1600（62.9）×1600（62.9） | ||
| 25 | 550（21.6）×550（21.6） | 1700（66.9）×1700（66.9） | |||
| 50 | 400（15.7）×400（15.7） | 700（27.5）×700（27.5） | 1000（39.4）×1000（39.4） | 1250（49.2）×1250（49.2） 1 | 1500（59.0）×1500（59.0） |
| 100 | 300（11.8）×300（11.8） | ） 500（19.6）×500（19.6） | 700（27.5）×700（27.5） | 800（31.5）×800（31.5） | 1000（39.4）×1000（39.4） |
※For distorted steel plates and out-of-balance load, a larger safety factor needs to be used. In such a case, please consult with us.
Lifma selection standard for steel plate size
| Steel Plate | Width | 914（35.9） | 914（35.9） | 1219（47.9） | 1219（47.9） | 1524（60.0） 1 | 1524（60.0）ー1826（71.8） |
| Length | 1829（72.0） | 3658（144） | 2438（95.9） | 4877（192） | 3048（120） | 6096（240） | |
| Size | 3×6 | 3×12 | 4×8 | 4×16 | 5×10 | 5ー6×20 | |
| Lifma | 4.5（0.17）ー12（0.47）mm thick | LMU-15D | LMU-20D | ||||
| 12（0.47）ー32（1.25）mm thick | LMU-20D | LMU-25D | |||||
| Number of unit in parallel | 2 | ||||||
| Number of units in series | 2 | 3 | 4 | ||||
| Total number of units | 4 | 6 | 8 | ||||
※When you plant to use two or more Lifmas by suspending them from one beam, please consult with us.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
Kawaki RFH High-viscosity fluids and high-pressure fluids
-
Fukuda 4140 Steel (Peck Drilling) Tribo-MAM Advanced tools
-
Kurimoto Roller Tire And Table Segment For Roller Mill
-
Nagasaki Jack NRH-618 Impact wrench hanger
-
Kondotec Standard Rail (JIS E 1101)
-
Hammer Caster 960HPS Trivalent Chromate Conversion Coated Caster
