Japan, Kansai Electric Heat Corp
Kansai Electric Heat Corp High-Blow Nozzle
Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: High-Blow
Features
Specification
Matching fluid : Air, Steam, Water (Order)
The system has a resisting pressure of 2 kgf/cm².
The slit features hard alumite treatment according to JIS6030 standards on aluminum.
Silicon heatproof packing is used for the chamber’s material.
| Model | Bore of the inlet | Adjustment range of slit width | Basis air volume par 1-inlet | Max. area of the slit par 1-inlet | Manufacturable length |
| 15AL | R1/2 | 0.5mm – 2.0mm | 0.8m3/min | 205mm2 | 100mm – 600mm |
| 25AL | R1 | 0.5mm – 2.0mm | 2.3m3/min | 510mm2 | 200mm – 1000mm |
| 40AL | R11/2 | 1.0mm – 3.0mm | 4.8m3/min | 1230mm2 | 200mm – 1500mm |
| 50AL | R2 | 1.0mm – 5.0mm | 7.6m3/min | 1950mm2 | 300mm – 2000mm |
|
Variation of the air inlet |
|||
| Model | Quantity of the air inlet |
Type | Reference photograph |
| 15AL 25AL 40AL 50AL |
Side 1 inlet | S1 |  |
| Side 2 inlets | S2 |  |
|
| Upper 1 inlet | U1 |  |
|
| Upper 2 inlets | U2 |  |
|
| 25AL 40AL 50AL |
Upper 3 inlets | U3 |  |
| 40AL 50AL |
Upper 4 inlets | U4 |  |
| 15AL 25AL 40AL 50AL |
Front 1 inlet | F1 |  |
| Front 2 inlets | F2 |  |
|
| 25AL 40AL 50AL |
Front 3 inlets | F3 |  |
| 40AL 50AL |
Front 4 inlets | F4 |  |
Related Products
-
Kondotec Poly Base
-
SAKUSAKU DIPV 2.00-0.20 Insert For Grooving / Traverse Processing / With V-type Chip Breaker
-
Chiyoda Seiki Nitrogen Blow And Air Tightness Test Equipment Deluxe Type
-
KONAN MVS300 Series 3-Port Solenoid Valves Pressure-resistant Packing Return Type
-
REX RB22 425122 RB Tube Cutter Series
-
Scaling Chisel For Electric Hammers
REQUEST QUOTATION
PAYMENT
LINK
