Japan, Kikusui Tape
Kikusui Tape Hazard Sign Tape
Made in Japan
Manufacturer: Kikusui Tape
Hazard Sign Tape
Polyolefin danger sign tape printed with yellow and black stripes (tiger pattern) (removable type)
Application (example):
・Danger signs for hospitals, factories, buildings, event venues, etc.
Explanation:
The base material used is polyolefin (non-vinyl chloride) film, ensuring that it does not generate chlorine-based poisonous gas during combustion. Printed with yellow and black stripes (tiger pattern), it stands out and is useful for calling attention to dangerous areas. It is a re-peelable type and leaves almost no adhesive residue when removed.
Features of Hazard Sign Tape
Performance:
| Thickness (mm) | 0.160 |
|---|---|
| Adhesion (N/10mm) | 6.00 |
| Tensile strength (N/10mm) | 60.0 |
Structure of Hazard Sign Tape
- Olefin film
- Print layer (stripe print)
- Olefin film
- rubber adhesive
- release paper
List of standard sizes and quantities in cases:
| Width (mm) | Length (m) | Quantity (roll) |
|---|---|---|
| 50 | 20 | 24 |
Precautions for use:
- Do not attach to uneven surfaces.
- Apply on a day when the temperature is above 10℃.
- Remove dust, water, and oil from the surface to be pasted or dry.
- Peel off the release paper so as not to pull the tape.
- After pasting, please crimp sufficiently.
- When the tape surface gets wet with water or oil, it becomes slippery.
- Depending on the surface to be attached, the adhesive may remain or the surface may become cloudy, so please test thoroughly before use.
- Please note that the release paper used for the tape may slip and fall if left on the floor.
- Do not apply directly to the human body (skin). You may get a rash.
- When storing the tape, keep it in a cool place away from direct sunlight.
Kouei is Distributor/Agent of Kikusui
Other items of Kikusui
Request the quotation for Kikusui
