Japan, Kikusui Tape
Kikusui Tape No.317H Kikurain Tape
Made in Japan
Manufacturer: Kikusui Tape
Model: No.317H
Heat-bondable outdoor road marking tape
Application (example):
・Road markings such as general asphalt pavement roads and factory premises traffic divisions, regular routes, etc.
・Parking lot markings
・Marks for sidewalks and bicycle paths
Explanation:
Road marking tape made from a special thermoplastic compound. By heating with a gas burner, etc., it melts and adheres to the road surface. Scattered glass beads on the surface retroreflect the light from the headlights. Compared to the stick-on type No.317, it is more resistant to stationary tire cutting. Numbers, letters, marks, etc. can also be created by pre-cutting.
Features of No.317H
Performance:
| Thickness (mm) | 1.50 |
|---|---|
| Tensile strength (N/10mm) | 33.0 |
| Abrasion resistance (mg) | 25 |
| Glass bead content (%) | 18 |
Structure of No.317H
- Glass beads
- special compound
List of standard sizes and quantities in cases:
| Width (mm) | Length (m) | Quantity (roll) |
|---|---|---|
| 50 | 5 | 30 |
| 100 | 5 | 12 |
| 150 | 5 | 10 |
| 300 | 5 | 4 |
Precautions for use:
- Please thoroughly consider the suitability and adhesiveness of the substrate in advance.
- Apply on a day with a temperature of 10°C or higher and no rain.
- There is a construction procedure on the attached sheet, so please follow it and pay attention to complete adhesion.
- When heating with a burner, be careful not to burn yourself or catch a fire.
- After construction, allow the area to cool sufficiently before opening it to traffic.
- When storing the tape, keep it in a cool place away from direct sunlight.
Kouei is Distributor/Agent of Kikusui
Other items of Kikusui
Request the quotation for Kikusui
Related Products
-
Daiwa Kenko TU Universal Joint
-
Vessel No.GS5P Single End GO-SAI Bit 5-Piece Set
-
NOHMI BOSAI FIPN Series Conventional Fire Alarm Annunciator
-
Watanabe WRBC-DI16F/WRBC-DI16DF Digital input module – Remote I/O
-
Watanabe RS7 [Sheathed RTD] with Lead Wire, Screw-in Type
-
Mirai Kogyo RDS-1S Cable wiring stand ‘Rakudashi Stand (Mini)
