Japan, Kitagawa
KITAGAWA TUX・TUS Series NC Rotary Table
Made in Japan
Manufacturer: Kitagawa
Model: TUX・TUS Series
Feature:
High performance range suitable for 5th axis machining on horizontal machining centres
High rigidity for heavy cutting
High accuracy
Top mounted motor position allows optimal machining area for horizontal 5 axis machining.
Air-hydraulic booster provides high clamping torque
Air-hydraulic booster or direct hydraulic clamping options available
Rotary joint options available
Rotary scale can be fitted to further increase accuracy.
*CE correspondence
Specification
Model | TUX200 | TUX250 | TUX320 | ||
---|---|---|---|---|---|
Table Diameter (mm) | ø200 | ø250 | ø320 | ||
Centre Hole Diameter (mm) | ø75H7 | ø105H7 | ø130H7 | ||
Through Hole Diameter (mm) | ø52 | ø78 | ø110 | ||
Centre Height (mm) | 140 | 180 | 225 | ||
Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | ||
Clamping Torque (N・m) (at pneumatic 0.45MPa /hydraulic 3.5MPa) |
600 | 1100 | 2600 | ||
Motor Axis Reduced Inertia (kg・m2) | 0.00055 | 0.00068 | 0.001 | ||
Servomotor (for Fanuc spec.) |
αiF 4/5000-B | αiF 4/5000-B | αiF 8/3000-B | ||
Total Reduction Ratio | 1/90 | 1/90 | 1/120 | ||
Max. Rotation Speed (min-1) | 33.3 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
25 (at motor 3000min-1) |
||
Allowable Work Inertia (kg・m2) |
0.50 (1.00) note) | 0.98 (1.96) note) | 2.24 (4.48) note) | ||
Indexing Accuracy (sec) | 20 | 20 | 20 | ||
Repeatability (sec) | 4 | 4 | 4 | ||
Mass of Product (kg) | 80 | 142 | 200 | ||
Allowable Load | Vertical (kg) | 100 (200) note) | 125 (250) note) | 180 (360) note) | |
Manual Tailstock (as an option) |
TS200RN | TS250RN | TS320RN | ||
Tail Spindle (as an option) | MSR142A/TSR142A | MSR181A/TSR181A | TSR181A45 | ||
Rotary Joint (as an option) | RJ40H20V02 Hydraulic/Pneumatic 4 ports |
RJ70H25V01 Hydraulic/Pneumatic 6 ports |
RJ70H32V01 Hydraulic/Pneumatic 6 ports |
Model | TUS400 | |||
---|---|---|---|---|
Table Diameter (mm) | ø320 | |||
Face plate (Option) | ø400 with T-slots | |||
Centre Hole Diameter (mm) | ø190H7 | |||
Through Hole Diameter (mm) | ø154 | |||
Centre Height (mm) | 255 | |||
Clamping Method | Hydraulic | |||
Clamping Torque (N・m) (at hydraulic 3.5MPa) |
7000 | |||
Motor Axis Reduced Inertia (kg・m2) |
0.0065 | |||
Servomotor (for Fanuc spec.) | αiF 12/4000-B αiF 22/3000-B |
|||
Total Reduction Ratio | 1/90 | |||
Max. Rotation Speed (min-1) | 22.2 (at motor 2000min-1) |
|||
Allowable Work Inertia (kg・m2) |
5.00 (10.00) Note 2) | |||
Indexing Accuracy (sec) | 20 | |||
Repeatability (sec) | 4 | |||
Mass of Product (kg) | 300 | |||
Allowable Load | Vertical (kg) | 250 (500) Note 2) | ||
Manual Tailstock (as an option) |
TS400RN | |||
Tail Spindle (as an option) | Order Production | |||
Rotary Joint (as an option) | 7MPa 6 ports
7MPa 7 ports 7MPa 8 ports 25MPa 11 ports 7MPa 13 ports |
Used with MP scale
7MPa 6 ports 7MPa 8 ports |
||
Used with rotary encoder
7MPa 6 ports |