Product Made In Japan
Manufacturer: KONAN ELECTRIC
Model: Air Filters  AF2/AF21; AF2S/AF21S; AF2P/AF21P; AF2PS/AF21PS

Drain fluids in the pneumatic lines may increase piping corrosion resistance, and hinder the function of controls in the line, finally leading to accidents. Be sure to use air filters to remove drain fluids from the line and prevent problems.

Model Code

Standard Type

Type mounted in the control box

Since these models are for panel mounting, drain cock are not installed but a female thread is tapped for piping. Please set up the drain valve separately.

Specifications

● Above values of mass exclude weight of mounting bracket.
● Refer to the catalog for details.
● Effective area shown when：inlet pressure 0.5MPa pressure drop（△ P）0.05MPa

Operation

Standard type

❶ Deflector

Changes air under pressure from IN port into a rotating flow and separates moisture from the air centrifugally.

❷ Filter element

Filters out lightweight dirt,foreign matter,etc. that cannot be separated from the air centrifugally.

❸ Bowl

Drain separated centrifugally runs down the inner wall of the bowl and collects at the bottom.

❹ Baffle plate

Prevents drain at the bottom of the bowl’s from mixing with the air again.

❺ Side glass

Used to see how much drain has collected.

❻ Drain cock

Turning the handle counterclockwise allows drain to be discharged.

Outside Dimensions

Standard type 

Type mounted in the control box 

Operating Instructions

Installation

● Install the air filter as far as possible from the air source.

● Leave room so that the bowl can be removed and the filter.

● Install the air filter and lay the pipe so that the drain port is located at dead bottom.

• Kouei is Distributor/Agent of KONAN.
• Other items of KONAN.
• Request the quotation for KONAN.