Air Preparation Equipment, Japan, KONAN ELECTRIC
KONAN MO2 Series Forced Spray Micromist Lubricators
Product Made In Japan
Manufacturer: KONAN ELECTRIC
Model: MO2 Series
This is a large capacity lubricator being the most suitable for a centralized lubricating system with many moving parts like air motors and gear chain etc., requiring a large amount of lubricant.
Model Code
Specifications
Outside Dimensions
Operating Instructions
1. Installation
● The install of the lubricator bowl must be downwards vertically.(FIG.1)
● As shown in FIG.2, the main inlet of the micromist lubricator must be connected to the regulator outlet and the pilot pressure (PLT.IN)must be tapped off the line between air filter and regulator.(FIG.2)
Caution
① If pilot air supplied to micromist lubricator without opening the main outlet of the regulator, the upstream regulator may exhaust the air through the relief valve. This is not a mulfunction and you may continue to use the micromist lubricator.
② Consult factory related to MICRO-TRAP. (KONAN MODEL TR1 SERIES)
2. Lubrication
● Be sure to close the main air valve before attempting to refill any lubrication oil (FIG.3)
● Use JISK2213 turbine oil with additive or equivalent of ISO VG32 or 46. Do not use spindle oil. (FIG.4)
- Kouei is a Distributor/Agent for KONAN.
- Other items of KONAN.
- Request the quotation for KONAN.
Related Products
-
KETT ELECTRIC LABORATORY LDL-01, LDL-02, LDL-03 Data Logger Software
-
Vessel No.GT-S6MLR Air Screwdriver Clutch Type
-
Vessel No.Head 70×1 Replacement head for No.70 (Size.1)
-
Okasan Kiko OKP-07M/OKG-07M Rotary Pump
-
Saitamaseiki AK-1350 Impact Drivers and Impact Wrenches
-
Shinano Electronics SA Series General-Purpose Panel Meter