Japan, Krohne
Krohne OPTISWITCH 6500 Capacitance Level Switches
![](https://koueitrading.com/global/wp-content/uploads/2020/06/Screenshot_2024-06-21_155111-removebg-preview-575x380.png)
Made in Japan
Manufacturer: KROHNE Japan KK
Model: OPTISWITCH 6500
Features
- Unaffected by foam, condensate or build-up
- Can be set to detect foam or even a change in media characteristics of the same liquid
- For media with dielectric constant >1.5
- Very fast response times
- Maintenance-free ‐ can be installed in any position
- Wide variety of hygienic process connections available
- Also available with a sliding connection for tanks with thick wall thickness / insulation or to overcome high process temperature
- EHEDG and 3A certified; complies with FDA and EC1935/2004
Typical Applications
- Small tanks in hygienic applications
- Tanks with tough, pasty or strongly adhesive media
- Overflow protection, high/low-level detection, dry-run or pump protection in tanks
- Interface detection
- Detection of foam
- Blockage prevention
- Media recognition
Specifications
General Information | |
---|---|
Product type | Level switch |
Product family name | OPTISWITCH |
Product positioning | For advanced hygienic applications |
Product variants | OPTISWITCH 6500 C: Compact housing |
Measurement variables | Level |
Measurement principle | Capacitance |
Level measurement type | Point level detection |
Contact to measured medium | Yes |
Interface measurement | Yes |
Redundancy | No |
Measured media | Liquids, Liquid/liquid interface, Foam, Slurries, Pastes, Solids, Bulk solids, Granulates, Powders |
Probe length units to display | mm/in |
Probe length | 18…250 mm / 0.7…9.8 in |
Operating Conditions | |
Process pressure | -1…16 barg / -14.5…232 psig |
Process temperature | -40…+200°C / -40…+390°F |
Materials | |
Gaskets | Ethylene propylene diene monomer (EPDM), Fluoroelastomer rubber (FKM/FPM), Kalrez® 6375, PFA |
Wetted parts | Austenitic stainless steel (1.4404/316L) |
Process Connections | |
Thread connections | Male: G½ G½ for hygienic adapters |
Hygienic adapters | Collar ferrule (DIN 11851): DN25, DN40, DN50 Tri-Clamp®: 1½”, 2″ Varivent®: N Collar ferrule (SMS 1147): 51 mm Weld-in sleeve: 30 mm / 1.2″ Weld-in sleeve with shoulder: 29 mm / 1.1″ Collared weld-in sleeve: 45 mm / 1.8″ Spherical weld-in sleeve: 35 mm / 1.2″ |
Approvals/Standards | |
Ingress protection | IP67, NEMA4/4X |
Certificates/Approvals Ex | ATEX |
Certificates/Approvals Hygienic | FDA, 3A |
Communication | |
Discrete outputs | NPN/PNP, Transistor |