Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa AS-1GA AS-GA Small-sized Small-capacity Acceleration Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: AS-1GA
The AS-GA is an oil damping type small-sized acceleration transducer for measuring small acceleration. Its cable can be removed easily.
Features
• Compact & lightweight and easy to use
• Suitable for scale models and human engineering.
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | ±9.807 m/s2(±1 G) |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Rated Output | 0.5 mV/V or more |
Environmental Characteristics
Safe Temperature | -15 to 65ºC |
---|
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 3 V AC or DC |
Input Resistance | 121 Ω ±1.7% |
Output Resistance | 121 Ω ±1.7% |
Cable | 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 5 m long Dedicated cable CB-AS-GA Sensor side: Dedicated connector (removable) Measuring instrument side: PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 300% |
---|---|
Frequency Response | DC to 40 Hz at 23ºC (Sensitivity deviation ±5%) |
Transverse Sensitivity | 4% RO or less |
Weight | Approx. 15 g (Excluding cable) |
Dimensions
Remarks
The acceleration transducer is subject to a constant acceleration in the direction of gravity, therefore measurement is restricted, taking into account this vertical movement (9.807 m/s2).
For the AS-1GA, AS-1GB, if sensitivity is set in line with the direction of gravity, then the rated capacity will be exceeded.
As long as the safe overload rating is not exceeded, there will be no damage, but characteristics will be outside the guaranteed range.
Related Products
-
Ascon Roll Outer Surface Machine BARO-8010 (Direct Pressure Type) Pipe roll blasting machine Blast Cabinet
-
Kyowa LUR-B-100KNSA1 LUR-B-SA1 Jack Load Cell
-
Kondotec Jack Base with Ditch
-
Fujii Denko SS RORIP SS21 Guided Type Fall Arrester
-
KITAGAWA IC series Manual Chuck
-
SAKUSAKU DIMC4 6R Insert For Grooving / Parting Off With C-type Chip Breaker