Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa AS-20TG AS-TG Small-sized Triaxial Acceleration Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: AS-20TG
The AS-TG is an oil damping type small-sized triaxial acceleration transducer for synchronously measuring acceleration in 3 directions of back & forth, right & left, and up & down
Features
• Synchronous measurement in directions X, Y and Z
• Overload Limit 1000% due to built-in stopper
• TEDS-installed versions can be manufactured.
Specifications
Performance
Rated Capacity | ±196.1 m/s2(±20 G) |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Rated Output | 0.5 mV/V |
Environmental Characteristics
Safe Temperature | -10 to 60ºC |
---|
Electrical Characteristics
Safe Excitation | 6 V AC or DC |
---|---|
Recommended Excitation | 1 to 3 V AC or DC |
Input Resistance | 121 Ω ±1.7% |
Output Resistance | 121 Ω ±1.7% |
Cable | 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 5 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 300% |
---|---|
Overload Limit | 1000% (With a stopper) |
Frequency Response | DC to 250 Hz at 23ºC (Sensitivity deviation ±5%) |
Transverse Sensitivity | 4% RO or less |
Weight | Approx. 110 g (Excluding cable) |
Dimensions
Remarks
Measurement range of up-down direction is narrowed by 1 G (9.807 m/s 2) because gravity acceleration is always applied to acceleration transducers. In terms of AS-1TG, detected value exceeds rated capacity in positive side toward gravidy direction. Although AS-TG acceleration transducers are not broked under safe overload rating, characteristics will be outside the guaranteed range.
Related Products
-
Asahi Bagnall Type B Trolley Wheel
-
Kitz 16FDY Ductile Iron 16K Y-Pattern Strainer
-
Super Tool SJC Series Screw Cam Clamp (J-Type)
-
Yamamoto YF-700H Powerful Handle Film Pack Gun
-
Kyowa For DB-350A 350Ω Gauge Bridge Box Input Adapter
-
Vessel No.MTA20WSQ3 “GO-TAN” (Hard Forged) Tilt Mirror Socket Adapter( 3/8″SQ 9.5mm Short)