Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: BER-A-500KP110S

Stainless steel models can be manufactured for wave pressure measurement.
The BER-A-110S soil pressure transducers come with the cable attached in parallel to the pressure-sensing surface

Features

●Wear of the pressure sensing surface does not affect output or initial values.
●Load cell-based design is less affected by bending effects.
●Usable for pressure measurement of coal or grain in a silo
●For pressure measurement of pulverulent bodies of approximately 15 mm in diameter

Specifications

Performance

Rated Capacity	500 kPa
Calculated Loads	3.5 kN
Nonlinearity	Within ±1% RO
Hysteresis	Within ±1% RO
Rated Output	1 mV/V or more

Environmental Characteristics

Safe Temperature	-30 to 80ºC
Compensated Temperature	0 to 70ºC
Temperature Effect on Zero	Within ±0.1% RO/ºC
Temperature Effect on Output	Within ±0.1%/ºC

Electrical Characteristics

Safe Excitation	10 V AC or DC
Recommended Excitation	1 to 5 V AC or DC
Input Resistance	350 Ω ±2%
Output Resistance	350 Ω ±2%
Cable	4-conductor (0.5 mm2) chloroprene cable, 9.6 mm diameter by 1 m long, bared at the tip (Shield wire is not connected to the case.)

Mechanical Properties

Safe Overloads	120%
Presure-sensing Surface	Approx. φ95 mm
Materials	Pressure sensing surface: Stainless steel metallic finish Flange and cable outlet: ZnC-plated MF
Water Resistance (Cable outlet)	600 kPa
Degree of Protection	IP68 (600 kPa), (IEC 60529)
Weight	Approx. 2.2 kg

Dimensions