Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: HS1003NAX4E8 detector HS1003-NA + indicator HM04E8, measuring weight 12t
It is a portable vehicle weighing scale that can measure simply by setting the same number of detection units as the wheels on a flat paved road and riding the vehicle. With an LCD display screen that imagines the arrangement of vehicle tires and a built-in printer, wheel weight, axle load, gross weight, left and right weight balance, etc. can be easily and stably measured.
Feature
Features of the detection section
Unique aluminum integrated structure with little eccentricity error
Wide mounting surface that facilitates measurement with flat tires
Rubber perimeter frame that facilitates vehicle riding
Direct release connector that takes into account connector damage when disconnecting
Water resistance by double-sided diaphragm type, Moisture resistance improvement indicator features
LCD display screen with contrast adjustment function that imagines the tire arrangement of the vehicle
The power supply is AC 100 ~ 240V automatic correspondence type, and can be used with DC 12V using the battery kit (sold separately) -HM04E8 (4 channels) has three modes: [Individual wheel weight display], [Axle load display], and [%display]. The M3E08 (9 channels) has two modes of “wheel weight display” and “axle load display” that can be switched with cursor keys
The built-in printer that can be printed by entering the car number
Interface RS-8C
Detailed functions such as “Indicator value stability mark” and “Gravity acceleration correction function”
Specification
Measured weight
12t
Maximum wheel weight
3000kg
Minimum display
2kg
Overall accuracy
±0.2%
(Note 1) Overall accuracy is when used at 25±10°C.
Detector Specifications
performance
Rated capacity
3000kg
Nonlinearity
±0.1% RO or less
hysteresis
±0.1% RO or less
Repeatability
0.1% RO or less
Rated power
Approx. 1.0 mV/V
Environmental characteristics
Permissible temperature range
-20~70°C(no condensation)
Temperature Compensation Range
-10~60°C(no condensation)
Temperature effect of zero
± within 0.01%RO/°C
Temperature effect of output
Within ±0.01%/°C
Electrical characteristics
Permissible applied voltage
20V DC
Recommended applied voltage
1~10V DC
Input resistance
395±5Ω
Output resistance
350±2Ω
cable
0.3mm2,4-core shield chloroprene 20cm,outer diameter 6mm,tip connector plug NJW-207-AdF6
(shield is connected to the main unit)
Mechanical properties
Permissible overload
120%
mass
Approx. 11kg (including cable)
Degree of protection
IP63 (JIS C 0920)
(Note) IP63 is not a permanent specification. Water resistance may be lost depending on the usage environment.
Indicator Specifications
Number of channels
4
What you see
Wheel weight, axle load, left and right, gross weight, ratio%, cross %
Number of digits displayed
Individual 5 digits, total 6 digits
Display method
LCD
Operating temperature range
-10~40℃
precision
± within 0.03%FS
printer
5×7 dot impact
power
AC 100~240V or DC 10~18V Power consumption 20VA (normal), 30VA (printer operation) External battery pack can be used (model name BATKIT) (sold separately)
Power supply DC 12V
mass
Approx. 7 kg
interface
RS-232C
accessory
AC power cable (3m), recording paper, ink ribbon
Dimensions
Configuration Diagram
Remarks
* The indicator is only for remote sensing cables.