Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa CC-33A Ambient Curing Instant Adhesive Glue
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: CC-33A Ambient Curing Instant Adhesive
In order to obtain good measurement data, the strain gauge must be fully bonded to the material under measure.
It is important to choose and use an adhesive that is suitable for the material to be measured, the material of the gauge base, and the measurement conditions.
*This is an external site.
Model | CC-33A: 2g×1pcsCC-33AX5 :2pcs 5g× |
---|
Specification
type | Room-temperature curing instant adhesive |
---|---|
Operating temperature range | -196~120 (Normal temperature range is 20~80) |
Main applicable materials | ・Metals (iron, stainless steel, copper, aluminum alloys, etc.) *Aluminum alloys (A1050, A2024), plastics (acrylic, PVC, nylon, etc.), composite materials (CFRP, GFRP, printed circuit boards, etc.),rubber |
Hardening conditions | ・Acupressure (100~300kPa) for 15~60 seconds. (Leave for more than 1 hour after curing) Note) Acupressure time may vary depending on temperature and humidity conditions. At low temperatures and low humidity, increase the acupressure time. |
classification | Cyanoacrylate 1-component type |
capacity | CC-33A: 2g×1pcsCC-33AX5 :2pcs 5g× |
forte | ・Suitable for general stress measurement adhesives in a room temperature environment. ・Short curing time and good adhesion workability. ・Measurement can be performed in about 1 hour after adhesion. |
Main applicable gauges | KFGS KFGT KFRB KFWB KFWS KFRPB KFRS KFP KSPB KSNB (EXCEPT E5) KSPH KSPLB KFLB KFNB KFSB KFF KCH KV |
Related Images
How to open
Remarks
Note: The operating temperature range is the adhesive itself and varies depending on the combination with the gauge. Before use, please read the attached instruction manual carefully before use.