Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa DTH-A-5 DTH-A Displacement Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: DTH-A-5
The DTH-A is a high accuracy, compact & lightweight displacement transducer.
Features
• High output
• Temperature effect on zero within ±0.01%RO per ºC
• TEDS-installed versions can be manufactured.
Specifications
Performance
| Rated Capacity | 5 mm |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.1% RO or less |
| Rated Output | 5 mV/V ±0.15% |
Environmental Characteristics
| Safe Temperature | -10 to 70ºC (Non-condensing) |
|---|---|
| Compensated Temperature | 0 to 60ºC (Non-condensing) |
| Temperature Effect on Zero | Within ±0.01% RO/ºC |
| Temperature Effect on Output | Within ±0.01%/ºC |
Electrical Characteristics
| Safe Excitation | 6 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 4 V AC or DC |
| Input Resistance | 350 Ω ±1% |
| Output Resistance | 350 Ω ±1% |
| Cable | 4-conductor (0.065 mm2) vinyl shielded cable, 4 mm diameter by 2 m long, terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
| Frequency Response | DC to approx. 2 Hz |
|---|---|
| Measuring Force | Approx. 1.5 N |
| Weight | Approx. 30 g (Excluding cable) |
| Degree of Protection | IP50 (IEC 60529) |
Others
| Initial Unbalance | With the rod fully extended is approx. -6000 to -5000 ×10-6 strain. |
|---|
| Standard Accessories | Mounting band FXB-5A |
|---|---|
| Optional Accessories | Extension rods EB-50, EB-100, EB-200 Replacement probes X, XS, SH Magnet base MB-B |
Dimensions
To Ensure Safe Usage
Fix the transducer to the steady point by using an accessory mounting band, screw and washer.
Remarks
(Note 1) Do not apply any displacement in other than expansion/contraction direction of the rod.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
